美国Checkline TI-25M-UWM 超声波测厚仪 美国Checkline TI-25M-UWM 测厚仪
美国Checkline TI-25M-UWM 超声波测厚仪 美国Checkline TI-25M-UWM 测厚仪
深圳市汉斯福特科技有限公司
杨工
座机：
手机：
传真：
Q Q:
公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼
概述
Measuring Range in Steel
0.050 - 19.99 inches
1.27 - 508.0 mm
超声波测厚仪是采用 的高性能、低功耗微处理器技术，基于超声波测量原理，可以测量金属及其它多种材料的厚度，并可以对材料的声速进行测量。可以对生产设备中各种管道和压力容器进行厚度测量，监测它们在使用过程中受腐蚀后的减薄程度，也可以对各种板材和各种加工零件作精确测量。
The new CHECK-LINE TI-25M-UWM Underwater Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals at depths of up to 300 feet (91.44 M).
The Checkline TI-25M-UWM can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
本测厚仪采用脉冲反射超声波测量原理，适用于超声波能以一恒定速度在其内部传播,并能从其背面得到反射的各种材料厚度的测量。此仪器可对各种板材和各种加工零件作精确测量。可广泛应用于石油、化工、冶金、造船、航空、航天等各个领域。
特性
1. Resolution of 0.001 inch (0.01 mm)
2. Large, backlit LCD display retains last reading
3. Simple operator controls virtually eliminate training
4. Special-purpose probes are offered for a variety of applications
5. 300 feet depth rating
6. Clear plexiglass construction, Stainless steel connectors, latches, and control bar
7. Switch-selected units for inches or mm
8. CE Certified
9. NEW Elastic wrist strap secures the gauge during dives
参数
|
Range in Steel |
0.050-19.99" (1.27 - 508.0 mm) |
|
Resolution |
.001" (0.01 mm) |
|
Display |
4½ - Digit, 0.5" Backlit LCD |
|
Velocity Range |
ft./sec ( m/sec.) |
|
Probe |
5 MHz, 0.5" Diameter |
|
Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
|
Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C) |
|
Battery Type |
Two AA batteries |
|
Battery Life |
200 hours |
|
Weight |
2.8 pounds |
|
Size |
3.5 x 7.5 x 2.75" |
|
Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
|
Warranty |
Gauge: 5 Years |
