ASTM F Full Size Baby Cribs 婴儿床安全测试(标准尺寸婴儿床)
测试要求概括：
Tests for toy accessories 关于玩具配件的测试（依照ASTM F963）
Flammability test (16 CFR 1500.44) 燃烧测试
Lead In Surface Coating (16 CFR 1303) 油漆中铅含量测试
测试项目明细：
Clause 5 General Requirements 一般要求
Clause 5.1 Wood parts 木材部分要求
Clause 5.2 Lead In Paint or Surface Coating 油漆中铅含量 (16 CFR 1303)
Clause 5.3 Small parts 小部件
Clause 5.4 Corner post 角柱
Clause 5.5 Slat construction 条板结构
Clause 5.6 Crib side configurations 婴儿床侧配置
Clause 5.7 Full-size baby cribs-Dimensions 标准尺寸的婴儿床尺寸要求
Clause 5.8 Spacing of crib components 婴儿床组件的间距
Clause 5.9 Toe holds 尖点支撑
Clause 5.10 Hardware and fasteners 五金和紧固件
Clause 5.11 Toys accessories(ASTM F 963) 玩具配件测试
Clause 5.12 Recordkeeping 记录保存
Clause 5.13 General Requirements review after testing(section 5) 测试后检查
Clause 5.14 Sharp points & edges before and after testing(16 CFR 1500.48&49) 测试前后检查尖锐的点和边
Clause 5.15 Flammability test (16 CFR 1500.3(c)(6)(vi)) 燃烧测试
Clause 5.16 Opening 打开
Clause 5.17 Scissoring, Shearing, or Pinching 剪裁，剪切，或修剪
Clause 5.18 Labeling 标签
Clause 5.19 Cord/Strap Length 线/绳长度
Clause 5.20 Cribs that fold for storage or transport 为了方便存放或运输的折叠婴儿床
Clause 6 Performance Requirements 性能要求
Clause 6.1 Plastic teething rail test requirements 塑料齿轮测试要求
Clause 6.2 Cycle test 循环测试
Clause 6.3 Crib Side Latch Test Requirements 婴儿床的侧边锁扣测试要求
Clause 6.4 Mattress support system vertical impact test requirement 床垫支撑系统的垂直冲击测试要求
Clause 6.5 Mattress support system test requirement 床垫支撑系统的测试要求
Clause 6.6 Crib side test requirements 婴儿床侧边测试要求
Clause 6.7 Spindle/Slat strength testing 主轴/条板强度测试
Clause 6.8 Cutouts 缺口
Clause 6.9 Entrapment in accessories 配件陷阱
Clause 6.10 Mattress support system opening 床垫支撑系统打开
Clause 8 Marking and labeling 标记和标签
Clause 9 Instructional literature 说明书
宁波盈通检测认证公司提供最全面的婴儿床测试服务，包括以下测试标准：
ASTM F1169:2010，ASTM F406:2007，ASTM F1821:2006，EN 1227:1999， ENAS/NZS 2172:2003，AS/NZS 2195:1999， ASTM FBS 7423：1999，EN CFR Part ASTM F
