Multilon T-2711J 汽车仪表板 耐低温冲击; 耐热性,高 日本帝人PC/ABS塑胶料 耐候材料
特性
耐低温冲击
耐热性,高
用途
汽车仪表板
形式
粒子
加工方法
注射成型
Rheological properties Value Unit Test Standard
ISO Data
Molding shrinkage, parallel 0.6 % ISO 294-4, 2577
Molding shrinkage, normal 0.6 % ISO 294-4, 2577
Mechanical properties Value Unit Test Standard
ISO Data
Tensile Modulus 2250 MPa ISO
Yield stress 56 MPa ISO
Yield strain 3 % ISO
Stress at break 48 MPa ISO
Strain at break >50 % ISO
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 80 kJ/m² ISO 179/1eA
Flexural modulus, 23°C 2300 MPa ISO 178
Thermal properties Value Unit Test Standard
ISO Data
Temp. of deflection under load, 1.80 MPa 104 °C ISO
Temp. of deflection under load, 0.45 MPa 124 °C ISO
Vicat softening temperature, 50°C/h 50N 122 °C ISO 306
Coeff. of linear therm. expansion, parallel 80 E-6/K ISO
Coeff. of linear therm. expansion, normal 80 E-6/K ISO
Electrical properties Value Unit Test Standard
ISO Data
Surface resistivity >1E15 Ohm IEC 60093
Other properties Value Unit Test Standard
ISO Data
Density 1140 kg/m³ ISO 1183
Characteristics