优点:阻燃防火高韧性高强度耐磨性高刚性自润滑高硬度耐候性消音性耐热好自熄性抗磨性易加工
无蠕动不霉烂耐老化低翘曲高刚性尺寸稳定减振性好滑动性好绝缘性好耐化学性无毒无臭
耐久性好防紫外线摩擦系数小玻纤加强碳纤加强导电导热
介绍:
PA66注射压力：通常在750~1250bar，取决于材料和产品设计。
PA66注射速度：高速（对于增强型材料应稍低一些）。 流道和浇口：由于PA66的凝固时间很短，因此浇口的位置非常重要。浇口孔径不要小于0.5t（这里t为塑件厚度）。
我司还供应以下产品:
| 供应 PA66 Velocity LCF40-PA66 生产商: PlastiComp, Inc. |
| 供应 PA66 Velocity LCF50-PA66 生产商: PlastiComp, Inc. |
| 供应 PA66 Velocity LGF50-PA66 生产商: PlastiComp, Inc. |
| 供应 PA66 Velocity LGF60-PA66 生产商: PlastiComp, Inc. |
| 供应 PA66 Secomid A 30 GF NERO 生产商: Poliblend S.p.a. |
| 供应 PA66 Secomid A NERO 生产商: Poliblend S.p.a. |
| 供应 PA66 Restramid PA 6.6 30GF 生产商: Polimarky Spolka Jawna |
| 供应 PA66 TECHNAMID A A-101 生产商: Poly Plastic |
| 供应 PA66 TECHNAMID A A-101N 生产商: Poly Plastic |
| 供应 PA66 TECHNAMID A A-SV25-0D 生产商: Poly Plastic |
| 供应 PA66 TECHNAMID A A-SV25-ETK 生产商: Poly Plastic |
| 供应 PA66 TECHNAMID A A-SV30-A 生产商: Poly Plastic |
| 供应 PA66 TECHNAMID A A-SV30-A-LOT 生产商: Poly Plastic |
| 供应 PA66 TECHNAMID A A-SV30-npR 生产商: Poly Plastic |
| 供应 PA66 TECHNAMID A A-SV30-TAP 生产商: Poly Plastic |
详解:
few happy moments abusing her, but the subject had already been so thoroughly canvassed during DA meetings it did not last very long. Silence fell again. Harry was very conscious of the slurping noises coming from the table next door and cast wildly around for something else to say.
‘Er ... listen, d'you want to come with me to the Three Broomsticks at lunchtime I'm meeting Hermione Granger there.’
