性能特点： ♦壳牌工业润滑油又高品质的合成型基础油精炼而成，在正常操作下使用寿命可达4-10年，为矿物油基传热油的倍数。 ♦高温导热油由高压加氢(SSOT)、加氢裂化（MHC）、加氢脱蜡（MDDW）及加氢精制（HT）后、经减压蒸馏后的基础油加入功能助剂调合而成，按国际标准在欧美国家定义按3类型合成油，其热稳定性和氧化安定性相当于PAO合成油。 ♦高温导热油组成纯净，油品分子中的硫、氮、氧、氯、重金属等有机杂质被氢原子被全部置换出外，易聚合的烯烃、二烯烃等不饱和烃得到了全面饱和，氢净化后的导热油其外观颜色清澈透亮。 ♦高温导热油极高的闪点，低凝固点，适用范围更广，热稳定性高，酸值低，有效延长设备寿命。 ♦在油体平均温度不超出上表所示的高温度和大气压力下运行的各种工业过程中采用冷油密封的密闭式间接加热和冷却系统。 ♦润滑油厂家开放式系统，但油体平均温度不得超出上表所示的高温度。Performance characteristics: ♦ sepah han industrial lubricants and synthetic base oil refining of the highest quality, the service life can reach in the normal operation of 4 to 10 years, heat transfer oil for mineral oil-based multiples. ♦ high temperature heat conduction oil by high pressure hydrogenation (SSOT), hydrocracking, hydrogenation dewaxing (MHC) (MDDW) and hydrofining (HT) base oil, after vacuum distillation after joining function additives blending, according to international standards in the European and American countries defined according to three types of synthetic oil, its thermal stability and oxidation stability is equivalent to PAO synthetic oil. ♦ of high temperature heat conduction oil, pure oil molecules of sulfur, nitrogen, oxygen, chlorine, heavy metals and organic impurities by hydrogen atoms by all replacement out, easy to polymerization of olefin and diolefin got fully saturated, unsaturated hydrocarbon hydrogen after purification, the heat conduction oil its appearance color clear and bright. ♦ high temperature heat conduction oil, high flash point, low freezing point, a wider range of application, high thermal stability, low acid value, effectively extend the service life of equipment. ♦ in the oil body average temperature does not exceed the maximum temperature shown in the table above and under atmospheric pressure with cold oil seal in the process of all kinds of industrial closed indirect heating and cooling systems. ♦ lubricant manufacturers open system, but the average oil body temperature shall not exceed the maximum temperature shown in the table above.
