苏州姑苏区、虎丘区、吴中区、相城区、吴江区、张家港市、昆山市、太仓市、常熟市壳牌导轨油销售 Shell tona guide oil, new name: shell tona S3 M Overview: the advanced machine tools used to manufacture precision parts have made extremely strict demands on the quality and lubrication of the guide rail. Tonna S is a special product developed to meet this demand. Take S is specially used for machine tool guideway, ramp lubrication oil, with highly refined mineral base oil and adhesion properties improver, anti-wear additives, "stick one slip properties improver additive composition and so on. apply 1. Guide rail of machine tools: the lubrication of the body and the feed mechanism of the machine is to satisfy the lubrication requirements of various kinds of surface materials of different machine tools, including various synthetic materials and metals such as cast iron guide rails. 2. Machine tool hydraulic system: this product can be used as hydraulic oil: specially recommended for hydraulic and guide rail joint lubrication system. 3. Machine gear box and spindle lubrication: this product can also be used for lubrication of machine tool gear and headstock. It can overcome the phenomenon of "crawling" under adverse conditions. For horizontal guide, low viscosity oil (Tonna S323 and 68) should be selected. Tonna S 220 should be used for cylindrical and other vertical guide rails. For further information on application. Contact shell's representative. Performance characteristics and customer interests 1. Excellent friction characteristics, special formulation. It can effectively overcome the phenomenon of "crawling movement" in the low-speed operation of machine tool, and ensure the accuracy of movement positioning, thus improving the precision of machining surface and the precision of the workpiece. 2. Leading technology, working with leading machine tool manufacturers to meet the lubrication requirements of today's most advanced machine tools with many different guide materials. 3. Extremely strong guide rail adhesion, strong adhesion to metal and plastic guide surface, has a good protective effect, not easy to be washed away by cutting fluid, otherwise. The dirt (such as the generated in metal cutting fluid) is attached to the guide rail, which will lead to the deviation of the mechanical center part, which will affect the machining accuracy and cause the rail corrosion. 4. Excellent emulsifying properties, not easy to form emulsion with metal processing fluid. Just floating on its surface is very easy to separate. Can extend the oil cycle and reduce the cost. 5. Excellent anti-wear performance, providing excellent anti-wear protection for guide, gear, bearing and hydraulic system components. 6. Extremely strong anti-corrosion resistance, even using water-soluble cutting fluid, can provide effective anti-rust and corrosion protection for machine tools and workpiece surfaces