开齿机报价|开齿机型号|开齿机品牌|开齿机多少钱

  • 发布时间:2021-08-18 00:00:00,加入时间:2016年04月07日(距今3405天)
  • 地址:中国»山东»济南:济南市历城区工业园
  • 公司:李兆溪个体, 用户等级:普通会员
  • 联系:李经理,手机:15552555789 电话:0531-85865701 QQ:540578173

开齿机厂家直销联系人李经理同手机号  

齿应开在槽口的外锤头侧,在内锤头尽可能不开齿或只开很浅的一点齿。原因是在后面的滚压工序中,外锤头会产生以自己颈根部为圆心的旋转变形而将开好的齿压入隔热条,从而保证滚压后隔热铝材的剪切强度。而槽口的内侧为定位部位,用来保证滚压后隔热型材的整体形状尺寸,就算内侧的齿开的很好,滚压后也压不到隔热条里,因此没有任何效果 

Teeth should be open on the hammer head outside the side of the slot, hammer head, as far as possible, don't open or open only shallow tooth. Reason is that in the back of the rolling process, the hammer head will produce deformation of the rotation of the centered on his neck roots and will have a good tooth pressure into the insulation, so as to ensure the shear strength of insulating aluminum after rolling. And the inner side of the slot for locating part, which is used to ensure the overall shape of insulating material after rolling size, even if the inside of the gear drive is very good, also after rolling pressure is less than heat insulation in the article, so there is no any effect 

好齿形的齿峰应小于0.2mm,不超过齿距的三分之一左右,这样滚压时才容易压入隔热条内。如果开齿太钝或没有开齿,就难以压入隔热条,隔热型材的剪切性能就无法保证。开齿的好坏主要由开齿轮质量、机器设备稳定性和操作水平来决定的。 

Good tooth shape of the teeth should be less than 0.2 mm, less than a third of the pitch, so when rolling pressure easily into the insulation within the article. If the tooth is too dull or no teeth, it will be difficult to press into the heat insulation, heat insulation material shear performance will not be able to guarantee. The stand or fall of hobbing is mainly composed of drive gear, machinery and equipment, quality stability and operation level. 

开齿轮外缘的齿形斜面应左右不对称,外侧角度应大些,这样方便将齿开在铝材槽口外侧。开齿穿条一体机开齿轮是损耗件,时间一长外缘的齿就会逐渐磨损,一般建议120吨左右要换新的开齿轮,当然这要看开齿盘的材质,差一些的几十吨就要更换,好一些的进口轮能使用更长的时间。开齿穿条一体机好的设备因稳定性好,往往更容易保证开齿的质量,若设备的稳定性欠佳,就会造成开齿盘的跳动,使得同一支型材一段开齿好,一段开齿不好,影响整体的开齿质量

1、开齿机参数

开齿刀φ80×240齿开齿速度0~70m/min开齿刀调节高度0~400mm开齿调节范围高度: 0~500mm   宽度: 0~260mm可加工最    大型材端面尺寸宽(300mm)×高(400mm)

2.2、穿条机参数

送料速度0~70 m/min穿条调节尺寸高度:0~500mm;宽度:0~260mm隔热条高度12~64 mm

2.3、滚压机参数

滚压速度0~70m/min可加工最      大型材端面尺寸宽(400 mm)×高(600 mm)

联系我时请说明来自志趣网,谢谢!

免责申明:志趣网所展示的信息由用户自行提供,其真实性、合法性、准确性由信息发布人负责。使用本网站的所有用户须接受并遵守法律法规。志趣网不提供任何保证,并不承担任何法律责任。 志趣网建议您交易小心谨慎。