ABB软启动PSS300 515-500L你购不购

  • 发布时间:2019-07-19 00:00:00,加入时间:2017年04月01日(距今2954天)
  • 地址:中国»广东»东莞:东莞市莞城区元岭路国汇大厦320
  • 公司:东莞市恒轩机电有限公司, 用户等级:普通会员 已认证
  • 联系:杨小琪,手机:18811829384 微信:yuqi20175 电话:0769-33215706 QQ:443297710

First, the soft start of electric vehicles:

1, the soft start of the electric car controller when zero, the main frequency is from zero speed to the rated frequency regulation gradually, so that the motor at the start of the process, the impact of starting current current overload control can not exist, without the impact of the current can be transformed into control, we can also according to their own needs, to adjust the current to start in size, causing the entire motor at the start of the process, is the torque does not exist any impact, mainly rely on the smooth operation of two start, so called soft start.

2, the main composition of the soft start is connected in series between the controlled motor and power supply, three-phase thyristor and its associated anti whole electronic control circuit, use different methods, the three-phase anti parallel thyristor conduction angle control, the controlled motor according to the different ways of the input voltage. So, can the effective implementation of electric vehicle controller with different functions, but the frequency converter and soft starter is two completely different products use, the frequency converter is mainly to adjust the speed, the output can not only change the voltage, but also can change the frequency of the soft starter is a pressure regulator that is mainly used in the process of motor starting, the only change of voltage is no change in the frequency of the inverter, although also has such as Rev. The function of the actuator, but its price is much more expensive, and the whole structure is also very complex.

Two 、 hard start of electric vehicle:

1, the hard start of electric vehicles is relative to soft start, the motor current can reach 3~6 times at the start, the impact on the system is relatively large, the battery is not good.

2, in order to slow down the impact, the control voltage increases slowly when starting, thus reducing the starting current, which is called soft start.

3, if there is no voltage control, directly to the impact, it is called hard start.

联系我时请说明来自志趣网,谢谢!

免责申明:志趣网所展示的信息由用户自行提供,其真实性、合法性、准确性由信息发布人负责。使用本网站的所有用户须接受并遵守法律法规。志趣网不提供任何保证,并不承担任何法律责任。 志趣网建议您交易小心谨慎。