PP-40GF000 BLACK MAXXAM 总代理 PP-40GF000 BLACK MAXXAM 总代理
优点: 阻燃导电耐磨抗静电耐老化耐腐蚀绝缘性密度小高强度刚度好高硬度高耐热耐低温
抗冲击抗划痕高透明度高光泽高刚性抗吸湿抗酸碱抗溶解抗氧化高流动韧性好高润滑
低摩擦密封性电性能好高频绝缘无臭无毒蒸汽消毒尺寸稳定
PP-40GF000 BLACK MAXXAM 总代理
介绍:
PP射出模具除了浇道浇口灌注原料外,也有冷却水道冷却原料设计。压出成型则靠滚轮内冷却水道来达成冷却效果,除外也有风刀,冷却水直接淋在吹袋上,以及中空吹气等冷却方式。
PP成品再加工延伸会增强效果,例如打包带靠前后滚轮带动速率不一即造成延伸效果,成品配向延伸部份抗张拉力加强不易撕断,但横向就极容易撕开。分子量分布也会影响高速生产时的延伸效果,所有压出成品包括纤维都有不等的延伸,真空及压空成型也可视为延伸的另一种形式。
我司还供应以下产品:
供应 PP,未指定 FRblend PP-1309 生产商: Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
供应 PP,未指定 FRblend PP-1314 生产商: Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
供应 PP,未指定 FRblend PP-1501 生产商: Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
供应 PP,未指定 FRblend PP-1503 生产商: Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
供应 PP,未指定 FRblend PP-1505 生产商: Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
供应 PP均聚物 FRblend PP-1313 生产商: Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
供应 PP均聚物 FRblend PP-2301 生产商: Colour Image Plastic Compound Sdn. Bhd. (CIPC) |
供应 PP 无规共聚物 Fusabond P MD353D 生产商: DuPont Packaging & Industrial Polymers |
供应 PP 无规共聚物 Fusabond P MD411D 生产商: DuPont Packaging & Industrial Polymers |
供应 PP,未指定 Fusabond P353 生产商: DuPont Packaging & Industrial Polymers |
供应 PP,未指定 Fusabond P613 生产商: DuPont Packaging & Industrial Polymers |
供应 PP均聚物 Fusabond P M613-05 生产商: DuPont Packaging & Industrial Polymers |
详解:
Whozair’ said Harry, sitting upright in his chair. The fire was almost out, the room very dark.
‘Dobby has your owl, sir!’ said a squeaky voice.
‘Dobby’ said Harry thickly, peering through the gloom towards the source of the voice.