Sandvik 7C27Mo2 is a martensitic stainless steel alloyed with molybdenum that is characterized by good formability. After hardening, the grade has:
Very good corrosion resistance
High toughness
Excellent fatigue strength
Sandvik 7C27Mo2 is typically used for cutters in electric shavers and springs.
Standards
UNS S42026
EN number (1.4034)*
*) Nearest equivalent grade
Chemical composition (nominal) %
C Si Mn P S Cr Mo
0.38 0.4 0.6 ≤0.025 ≤0.010 13.5 1.0
Forms of supply
The strips can be supplied either in coils or as straightened lengths of 0.5 - 4.0 meter (1.6 - 13.1 feet). The coil weight is max 5 kg/mm (280 ibs/in.) of strip width.
Hardening and tempering of the strip steel is needed to achieve the correct finish and to meet the properies reguired by the end user.
Thickness Width
mm (in.) mm (in.)
Dimensions
Min. Max Min. Max.
0.10 (0.0039) 4.5 (0.177) 5 (0.197) 350 (13.78)
Other sizes can be supplied to meet specific requirements.
