ABB DPT-CB011双电源自动转换开关；DPT63-CB011 C25 2P
双电源切换柜顾名思义它有两路电源进线，一般多用于低压配电柜。主供电源一般是市电，是从变压器过来的；备供电源一般是从柴油发电机供过来的。工作时，通过一个控制器来实现主供和备供的转换：主供有电时，控制器自动合上主供回路，即靠变压器供电；当主供失电时，控制器会给发电机组一个启动信号让发动机工作供电，这时备供回路就会带电，双电源就会自动分开主供，和上备供。当主供市电恢复供电时再会分开备供合上主供，控制器再给发电机组信号让其停止。其实这就是我们平时说的双电源的“自投自复”功能。
As the name suggests, dual power switch cabinet has two power supply lines, usually used in low voltage distribution cabinets. The main power supply is generally the city power, it comes from the transformer; the supply power supply is usually supplied from the diesel generator. When working through a controller to achieve the main supply and available for conversion: the main supply power is automatically closed loop controller for main transformer power supply, which is close; when the main for the loss of electricity, the controller will give a start signal generator to let the engine power supply, then the road will be charged back to prepare for dual power supply, can automatically separate the main supply, and available. When the power supply is restored to the city, the power supply will be separately supplied, and the controller gives the generator signal to stop it. In fact, this is the "self - switching" function of the dual power supply we usually say.
普通的低压配电柜一般分为进线柜、电容补偿柜和馈线柜。他们都是只有一路从变压器来的电源，没有备用电源，更不能进行电源的切换。
General low-voltage distribution cabinet is generally divided into line cabinet, capacitance compensation cabinet and feeder cabinet. They are all the only power from the transformer, there is no backup power, more power can not be switched.
