静电放电模拟器 / 静电放电发生器 ESD / EMC TESTING SYSTEM 一般 The ESS-2000AX ESD Simulator generates highly consistent, repeatable ESD pulses up to 30kV in both contact and air discharge modes. 该手术， 2000AX静电放电仿真器生成高度一致，可重复的ESD脉冲高达30kV在接触和空气放电模式。Compliant with IEC standard, the unit features a 5.7-inch display, a lightweight gun and optic serial interface. 符合符合IEC61000 - 4 - 2标准，该单位采用了5.7英寸的显示屏，轻机枪和视神经串行接口。 A variety of capacitor and resistor units are available and are easily changeable within the gun. 各种各样的电容和电阻单位提供方便复杂多变的枪。 The fully- programmable, menu-driven simulator offers three trigger modes. 完全可编程的，菜单驱动的仿真器提供了三种触发模式。 FEATURES 特征 1. Fully programmable menu-driven simulator providing three operation modes: IEC standard, Manual and Sequence 完全可编程的菜单驱动的仿真器提供了三种操作模式： IEC标准，手册及序列 2. A 5.7-inch color LCD for easy setting and good visibility 5.7英寸的彩色液晶显示屏，便于设置和良好的能见度 3. Unique shape for the operator's easy access to the control and displays even when the unit is put on the floor level (ground plane) 形状独特的经营者很容易获得的控制和显示，即使该单位提出的地板上一级（地平面） 4. Communications with PC through the optic serial interface 通信与PC机通过光纤串行接口 5. A wide variety of the dedicated options 各种各样的专用选项 联系人：姚小姐：电话 QQ: 廖先生 QQ： 公司：深圳市迈凯瑞仪器仪表有限公司