MGE滑板的优良特性：
1．良好的弹性和抗冲击性：能够较好地消除轨道不平造成的局部高压带来的各种危害，
可以作为大型的滑板平移，MGE顶推滑板，在实际应用极为广泛，得到了各个大型桥梁建筑单位的好评；
2．摩擦系数低：摩擦系数小，且动静摩擦系数相差小，不会出现爬行现象，运行平稳；
3．自润滑免维护：即使在干摩擦条件下也可正常使用，油润滑的状态下性能；
4．承载能力大、抗震性能好：既能承受较大的冲击载荷，也能承受冲击载荷，当自身
受到冲击荷载时，其柔韧性、自恢复性能有效的保护运行件和其它机构免受机械损伤；
5.不剥落、尺寸稳定性好：滑块抗剪能力强，不会产生复合材料、橡胶、塑胶、胶木
等材料产品的脱落情况；
6.吸水率低：吸水率小，与其他金属相比几乎不吸水，吸水体积变化小，尺寸稳定性
好；
7.耐磨损：比磨耗率相比其他金属材料提高了一个数量级，使用寿命大大提高。
8.抗腐蚀：自润滑材料能抵抗在电场、化学场、力场及酸、碱作用下的各种介质的腐
蚀作用，在酸、碱、盐水溶液（浓度在5%-25%）中浸泡，溶胀及溶出均小于0.03%-0.7%。
Excellent features of MGE skateboard:
1. Good flexibility and impact resistance: it can effectively eliminate various hazards caused by local high pressure caused by track irregularity.
It can be used as a large skateboard translation. MGE push skateboard is widely used in practice and has been well received by various large bridge construction units.
2. The friction coefficient is low: the friction coefficient is small, and the difference between dynamic and static friction coefficient is small.
3. Self-lubricating and maintenance-free: it can be used normally even under dry friction condition.
4. Large load bearing capacity and good seismic performance: it can withstand both large impact load and impact load when it is on its own
When subjected to impact load, its flexibility and self-recovery performance effectively protect the running parts and other mechanisms from mechanical damage.
5. No peeling, good dimensional stability: the slider has strong shear resistance and will not produce composite materials, rubber, plastic and bakelite
The shedding of such material products;
6. Low water absorption rate: low water absorption rate, little water absorption compared with other metals, small change in water absorption volume and dimensional stability
Good;
7. Wear resistance: the wear rate is an order of magnitude higher than that of other metal materials, and the service life is greatly improved.
8. Corrosion resistance: self-lubricating materials can resist the decay of various media under the action of electric field, chemical field, force field and acid and alkali
Corrosion, in the acid, alkali, salt solution (concentration in 5%-25%) immersion, swelling and dissolution are less than 0.03%-0.7%.
上文介绍并不详细，欢迎来电咨询关于工程塑料合金板的详细信息：（手机/） QQ； 联系人：刘女士
