锁线装订设备 折页锁线皮壳装订机器的维护和保养 Maintenance
保持机器外部和内部的清洁,是保证机器长寿和高效率生产的基本条件,因此,要求你经常地、彻底地清除机器表面和内部所有部件上的异物、污垢和沉积物,认真地按时保养机器。 Maintaining external and internal cleaning of the machine is a basic condition for ensuring longevity and efficient production of the machine and therefore requires you to thoroughly and thoroughly remove foreign matter, dirt and deposits from the machine surface and all internal parts,
⑴ 锁线装订设备 折页锁线皮壳装订进行清洁工作时,切勿使用锋利的工具铲刮及使用腐蚀济清洗。When cleaning the machine, do not use sharp tools to scrape and use corrosion.
(2) 锁线装订设备 折页锁线皮壳装订机器工作时不允许放置任何工具或影响装订工作的其他物品于机器上。 The machine is not allowed to work with any tools or other items that affect the binding work on the machine.
⑷ 锁线装订设备 折页锁线皮壳装订所有与纸张接触的部位,如吸料嘴、机械手及夹紧装置、收放输送料道、冲孔推刀,冲孔模具等处不得沾有油污。 All parts in contact with the paper, such as suction mouth, manipulator and clamping device, retractable conveying material, punching knife, punching mold, etc. shall not be stained with oil.
(5) 定期检查锁线装订设备 折页锁线皮壳装订运动件工作是否正常,各滚动轴承与滑动轴承的温升是否超过规定,各电机与气泵的工作温度是否超过规定。如出现异常,必须停机进行检修或保养。Regularly check whether the normal work of sports parts, the rolling bearing and sliding bearing temperature rise is more than the provisions of the motor and pump operating temperature is more than the provisions. If there is any abnormality, it must be shut down for maintenance or repair
(6) 定期检查锁线装订设备 折页锁线皮壳装订润滑情况,传动带松紧程度,链条张紧程度,振动较大处的螺钉拧紧程度。 Regularly check the lubrication, the degree of tension of the belt, the degree of chain tension, the greater the degree of tightening the screw tightening.
北京市 广东省 山东省 江苏省 河南省 上海市 河北省 浙江省 香港特别行政区 陕西省 湖南省 重庆市 福建省 天津市 云南省 四川省 广西壮族自治区 安徽省 海南省 江西省 湖北省 山西省 辽宁省 台湾省 黑龙江 内蒙古自治区 澳门特别行政区 贵州省 甘肃省 青海省 新疆维吾尔自治区 西藏区 吉林省 宁夏回族自治区锁线装订设备 折页锁线皮壳装订