保定泰鼎路桥工程有限公司位于保定城东科技产业园开发区。致力于市政工程、高铁工程、地铁工程、高速公路工程、水利工等领域的砼制品及模具制品的建设设备制造。
随着人们环保意识的提高,人们越来越多的不仅仅只是想追求经济效益,人们更愿意让生后环境更加美好,让天更蓝,水更绿,空气更清新.所以现在越来越多的化粪池模具被建造,而她受欢迎的原因当然是让化粪池模具产品性能特点符合了人们的环保意识.化粪池模具使用高分子材料与高强度玻璃钢纤维复合制成的圆筒型整体化粪池,与传统砖混化粪池相比,具有严密性好不渗漏、重量轻易于运输、抗压强度高、耐酸碱使用寿命长、安装快捷等优点.模具结构设计独特、技术领先,产品同时具有质量轻、强度高,耐腐蚀性好、无渗漏、无污染、成型性好、使用寿命长等特点.化粪池模具中沉淀下来的污泥经过3个月以上的厌氧消化,使污泥中的有机物分解成稳定的无机物,易腐败的生污泥转化为稳定的熟污泥,改变了污泥的结构,降低了污泥的含水率.池体两端设有进、出水管和池顶设有检查井口,池内用隔仓板分隔,并设有环流泛水装置以增加污水滞留时间,提高腐化效果.化粪池模具还是方型的,顶部和底部略小,若是将其分开就是上下两个梯形.加工时先加工出来两个凹槽状的模型,再把它们合在一起,即成为一个成品.化粪池是利用沉淀和厌氧发酵原理去除生活污水中悬浮性有机物的处理设备。高效波纹玻璃钢化粪器内部设有隔板，隔板上的孔上下错位，不易形成短流，并将整下罐体分成三部分；一级厌氧室、二级厌氧室和澄清室，一级、二级厌氧室底部相通，内部加有“MDS专用特型填料”。这样的分隔减少了污水与污泥的接触时间，使酸性发酵和碱性发酵两个过程互不干扰，同时填料的存在增加了污水污泥与厌氧菌的接触表面积，大大提高了反应效率。化粪池是基本的污泥处理设施，同时也是生活污水的预处理设施，它的作用表现在：
Septic tanks are the basic sludge treatment facilities, but also domestic sewage pretreatment facilities, its role in:
1、 保障生活社区的环境卫生，避免生活污水及污染物在居住环境的扩散。
1, ensure the environmental hygiene of living communities and avoid the diffusion of domestic sewage and pollutants in the living environment.
2、 在化粪池厌氧腐化的工作环境中，杀灭蚊蝇虫卵。
2. Kill the mosquitoes and flies eggs in the anaerobic environment of septic tanks.
3、 临时性储存污泥，有机污泥进行厌氧腐化，熟化的有机污泥可作为农用肥料。
3. Temporary storage of sludge, anaerobic decomposition of organic sludge, mature organic sludge can be used as agricultural fertilizer.
4、 生活污水的预处理（一级处理），沉淀杂质，并使大分子有机物水解，成为酸、醇等小分子有机物，改善后续的污水处理。
4. Pretreatment of domestic sewage (primary treatment), precipitation of impurities, and hydrolysis of macromolecular organic matter into acid, alcohol and other small molecular organic matter, improve the subsequent sewage treatment.第一阶段产品为方型，顶部和底部略小，若是分开就是上下两个梯形。加工时先加工出来两个凹槽状的模型，再把它们合在一起，即成为一个成品。这种产品解决了传统产品不耐腐蚀，易渗漏堵塞的缺点，但是严密性还不够好，抗压性也一般，无法制作大型产品。
The first stage of product is the side, top and bottom is slightly smaller, if separate upper and lower two ladder. Two grooves are processed in the process of processing, and then they are combined together to become a finished product. This product solves the shortcomings of traditional products, such as no corrosion resistance, easy leakage and blockage, but the tightness is not good enough, and the compression resistance is also general, so it can not make large products.
第二阶段产品基本为横卧的圆柱体，但顶部和底部还是设计为平面。车轮状凹凸面封头开始使用。因为是筒状模具，这一阶段的产品一般采用对接的方法连接结合。这种产品的抗压性能要比第一阶段的好，但是产品的严密性还可以再加以改良，而且这种产品的加工程序复杂，不利于工厂化生产。
The second stage product for the horizontal cylinder, but the top and bottom is designed into a plane. The wheel - shaped concave convex head begins to use. Because of a cylindrical mold, the product of this stage is usually connected by a butt connection. This product has better compression performance than the first stage, but the tightness of the product can be further improved, and the processing program of this product is complex, which is not conducive to factory production.
第三阶段产品也叫手糊玻璃钢化粪池。这种产品保持了第二阶段的车轮状封头设计，筒体为圆筒状，基本上一次成型，但无层次工艺，很难同时满足制品对于强度和抗漏渗、防腐蚀的要求。
The third stage product is also called the hand paste glass steel septic tank. This product has maintained second stages of wheel shaped head design, the cylinder is cylindrical, basically once formed, but no level process, it is difficult to simultaneously meet the requirements for products for strength and anti leakage and corrosion protection.
第四阶段产品即为机械缠绕玻璃钢化粪池，这种产品筒体两端采用力学凹凸面设计制作，筒体采用机械缠绕工艺、高抗压结构设计制作，产品整体成型后抗压、抗冲击性强度以及韧性都比传统手糊玻璃钢化粪池的安全系数增加数倍，弥补了传统手糊玻璃钢化粪池、波纹型玻璃钢化粪池罐体手糊厚薄不均匀、制造粗糙等不足。
The fourth stage of the product is mechanical winding FRP septic tank, making mechanical design using this product both convex and concave cylinder, the winding process, high compressive mechanical structure design by cylinder, the overall molding products after the compressive strength, impact strength and toughness than the traditional safety coefficient hand paste glass reinforced plastic septic tank increases several times, make up the traditional hand lay-up FRP septic tank, corrugated glass steel septic tank tank hand uneven, rough manufacturing defects
