回收NRP2回收R&S NRP2功率计
一个人至少拥有一个梦想，有一个理由去坚强。心若没有栖息的地方，到哪里都是在流浪。
想法不同，结果便不同；选择不一样，生活才变样
我们要善待陌生人～更要善待那些知道你在做什么还一直支持你的朋友！感谢有你！
东莞市诺展电子仪器有限公司
是一家提供电子测量仪器销售，租赁，维修,回收的专业性公司。
长期回收电子测量/通信测试仪器仪表，大量收购闲置二手仪器，收购倒闭工厂仪器仪表。需要处理仪器仪表的欢迎咨询，价高同行！
回收NRP2回收R&S NRP2功率计
的r和s®NRP2同时支持多达四个功率传感器的r和s®NRP家庭。前面板上的功能键提供快速访问重要的功能。用户可以打开设置菜单或零连接传感器的频率在一个按钮的推。模式键提供了直接访问所有可用的测量功能。
数值显示。
可保存/召回内存位置允许快速访问的个人设置。预设所有主要的移动无线标准,比如3 gpp LTE,3 gpp WCDMA,GSM / EDGE,无线局域网和蓝牙®,确保正确的测量用少的按键。
才华横溢的TFT彩色显示器支持直观,窗口操作的概念。关键参数和功能是不同颜色,一眼就可以看到。
研究的结果发表在数值和图形显示窗口,可以很容易地配置。
在连续平均破裂平均时隙和时间门平均测量模式,可以显示四数值结果
Straightforward numerical and graphical display of measured values, plus intuitive operation
The R&S®NRP2 simultaneously supports up to four power sensors of the R&S®NRP family. Function keys on the front panel provide quick access to the most important functions. Users can open the frequency setting menu or zero the connected sensors at the push of a button. The mode key provides direct access to all available measurement functions.
Numerical display.
User-programmable save/recall memory locations allow fast access to personal settings. Presets for all major mobile radio standards, such as 3GPP LTE, 3GPP WCDMA, GSM/EDGE, WLAN and Bluetooth®, ensure correct measurement with a minimum of keystrokes.
The brilliant TFT color display supports the intuitive, window-based operating concept. Key parameters and functions are color-coded and can be seen at a glance.
Results are presented in numerical and graphical display windows that can be easily configured.
In the continuous average, burst average timeslot and time gate average measurement modes, up to four numerical results can be displayed in parallel. Ratio, SWR, return loss and reflection coefficient can be calculated from two measurement channels using predefined computation functions and displayed in addition to the absolute and relative power level.
Trace measurements and statistical measurements are presented in graphical windows. The trace mode allows simultaneous display of two traces in one measurement window. Level differences and time offset can be seen at a glance and accurately measured using horizontal and vertical markers. It is also possible to display the ratio of two traces.
Timeslots and time gates as well as the associated measurement values (average, peak or peak/average) can be graphically displayed in the trace window.
All R&S®NRP-Z8x wideband power sensors allow automatic pulse analysis. Up to six of 15 user-selected pulse parameters can be displayed in addition to the measurement trace.
硬件接口远程控制和触发
的r和s®NRP2提供了三种不同的远程接口集成在自动化测试设置标准:以太,USB和通用接口总线。
一个触发输入后面板允许外部触发的同步功率测量。例如,使用一个r和s®NRP-Z81触发信号可以来自测量信号和输出触发器的输出(触发主模式)。level-proportional电压或限制监测可以输出数字信号通过BNC连接器。
信号统计:提供3 gpp FDD信号记录使用r和s®NRP-Z81;水平和垂直标记使精确的分析(如PDF和CCDF)。
Hardware interfaces for remote control and triggering
The R&S®NRP2 provides three different remote interfaces for integration in automated test setups as standard: Ethernet, USB and GPIB.
A trigger input on the rear panel permits external triggering for synchronized power measurements. Using an R&S®NRP-Z81, for example, a trigger signal can be derived from the measurement signal and output at the trigger output (trigger master mode). A level-proportional voltage or a digital signal for limit monitoring can be output via BNC connectors.
Signal statistics: CDF of a 3GPP FDD signal recorded using the R&S®NRP-Z81; horizontal and vertical markers enable precise analysis (as with the PDF and CCDF).
回收NRP2回收R&S NRP2功率计
回收NRP2，回收R&S NRP2，回收R&S功率计，回收NRP2功率计
