高性能 DMA(直接存储器存取)
线扫描触发功能
直接兼容市场上数以百计的 Camera Link 相机
带速率转换器的可控线性扫描操作
Mechanical
Form Factor PCI Express card
Format Low profile, half length, 1-lane PCI Express card
Cooling method Air-cooling, passive heatsink
Mounting For insertion in a low-profile or standard height, 1-lane or higher, PCI Express card slot
Connectors
'A' on bracket:
26-position Shrunk Delta Ribbon (SDR) socket
Camera Link Base connector
'EXTERNALn standard bracket:
25-pin 2-row female sub-D connector
I/O lines and power output
'INTERNALn PCB:
26-pin 2-row 0.1" pitch pin header with shrouding
I/O lines and power output
'POWER INPUT' on module:
4-pin MOLEX power socket
12 VDC power input for PoCL camera and I/O power
Dimensions Lmm x H 68.90 mm L 6.6 in x H 2.71 in
Weight 98 gz
Host bus
Standard PCI Express 1.0
Link width 1 lane
Link speed 2.5 GT/s (PCIe 1.0)
Maximum payload size 1024 bytes
DMA 32- and 64-bit
Peak delivery bandwidth 256 MB/s
Effective (sustained) delivery bandwidth
Up to 200 MB/s for a PCI Express payload size of 256 bytes
Up to 180 MB/s for a PCI Express payload size of 128 bytes
Power consumption Max. 4.5 W; Typ. 3.8 W (0.34 A 3.3V;0.22 A +12V)
Camera / video inputs
Interface standard(s) Camera Link 2.0
ECCO - Extended Camera Link Cable Operation ECCO
Number of cameras One Base or Lite camera
Line-scan cameras supported Yes
Maximum aggregated camera data transfer rate 2.04 Gbit/s (255 MB/s)
Camera Link configuration Base or Lite
Camera Link clock frequency From 20 MHz up to 85 MHz
PoCL (Power over Camera Link) One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protections
Camera types
Gray-scale and color (RGB and Bayer) cameras
Area-scan and line-scan cameras