78 pean countries began to produce polyaluminium chloride as flocculant for industrial sewage treatment in 1976, and the United States and Canada approved its use in urban water supply and industrial sewage treatment in 1983. Polyaluminium chloride (PAC) is a commonly used coagulant in water treatment. Its water treatment effect is remarkable, and it plays an important role in drinking water and industrial sewage purification. The content of polyaluminium chloride isand 30%. The content of polyaluminium chloride is different, the use is different, and the corresponding price of polyaluminium chloride is also different.
It is obvious that polyaluminium chloride (PAC) can manage water pollution reasonably.
The state has investigated 854 townships and villages, with a daily discharge of 36.53 billion tons. In the meantime, an agreement has been reached on 550 million tons of industrial wastewater. Most of these wastewater is discharged directly without treatment and pollutes rivers, lakes and seas. Is the harm of water pollution obvious Water pollution and deterioration of water quality have brought serious 多年来聚合氯化铝已发展成为技术成熟、市场销量大的絮凝剂，并有逐步取代传统絮凝剂的趋势。西欧各国于1976年开始生产聚合氯化铝，用作工业污水处理絮凝剂;美国、加拿大已于1983年批准将其用于城市给水和工业污水处理。 聚合氯化铝是水处理混凝剂的常用药剂，水处理效果显著，在饮用水、工业污水净化中有着至关重要的作用。我们常用到的聚合氯化铝含量有聚合氯化铝含量的不同，用途也不同，相对应的聚合氯化铝价格也不同cost of treatment, and improve the quality of effluent. Polyaluminium chloride is used as purifier for daily drinking water and industrial sewage (such as oily sewage, printing and dyeing sewage, paper-making sewage, etc.). In addition, it is also widely used in fine casting, paper making and leather making. The effect of high turbidity water is particularly obvious; without alkaline additives or other coagulant aids, it is suitable for wide water quality, fast and large alum composition, high quality, easy sedimentation, high safety of clean water, low corrosiveness and low labor intensity of workers.
