概述
The Dytran 2200V1 is a probe style miniature IEPE pressure sensor with a sensitivity of 50 mV/psi, designed to measure dynamic pressure phenomena over frequency ranges of 1 Hz to 100 kHz and higher.
Design of the model 2200V1 incorporates a pure synthetic alpha quartz sensing element operating in compression mode to create an output signal that is precisely analogous to pressure impinging on the thin stainless steel diaphragm. Units weigh just six grams and are hermetically sealed for reliable operation in high humidity and dirty environments. They are also acceleration compensated to reduce the risk of spurious ambient vibration signals adding to signal output.
特性
1. 50 mV/psi
2. 100 psi range
3. 1,000 psi maximum pressure
4. 300 kHz resonant frequency
5. 10-32 axial connector
6. mounting thread
7. 6 grams
8. Stainless steel
9. Hermetic
10. Acceleration compensated
11. IEPE
应用
1. Hydraulic and pneumatic system pressure perturbations
2. Shock tubes
3. Blast testing and other fast rise time pressure measurements
4. Process control
5. General purpose dynamic pressure measurements
参数
RESONANT FREQUENCY 250 kHz
RISE TIME, NOM. 2 mSEC
ACCELERATION SENSITIVITY, AXIAL DIRECTION .002 PSI/G
LINEARITYF.S.
TEMPERATURE RANGEto +500 oF
COEFFICIENT OF THERMAL SENSITIVITYF
MAXIMUM SHOCKG
MAXIMUM VIBRATION +G
MATERIAL, BODY/DIAPHRAGM 17-4 PH/316L STAINLESS STEEL
ELECTRICAL CONNECTOR 10-32 COAXIAL
ENVIRONMENTAL SEAL EPOXY
WEIGHT 7 GRAMS
ACCESSORIES SUPPLIED (2) MODEL 6600 SEAL, BRASS
配件
Supplied Accessories: (2) model 6600 pressure seals
Recommended Accessories: model 6110C current source power unit, model 6501 mounting adapter, model 6502 mounting adapter
Compatible Cables: 6011A
订货型号
2200V1
相关型号
MODEL 2200C7 0 PSI
MODEL 2200C6 0 PSI
MODEL 2200C5 PSI
MODEL 2200C4 PSI
MODEL 2200C2 PSI
MODEL 2200C1 PSI
