1050V1 IEPE型力传感器
概述
The Dytran 1050V1 is an IEPE force sensor designed to measure dynamic forces up to 10 lbf over a wide frequency range. Offered with a sensitivity of 500 mV/lbf, this dynamic force sensor can measure up to 10 lbs full scale in tension mode. As an IEPE sensor, the model 1050V1 features built-in electronics, eliminating the need for an external charge amplifier and converter.
Design of the model 1050V1 features a quartz sensing element, operating in compression mode and packaged in a rugged stainless steel housing weighing 32 grams. Units utilize a 10-32 axial connector and atapped hole located at the top of the sensor housing for ease of mounting.
参数
SPECIFICATION VALUE UNITS
STIFFNESS 11.4 Lb/m In
MOUNTED RESONANT FREQUENCY, UNLOADED 75 kHz
LINEARITY [2] +/- 1 %F.S.
F.S.OUTPUT VOLTAGE, NOM. 5 VOLTS
MAX SHOCK, UNLOADEDG's
MAX. VIBRATION, UNLOADED +G's
COEFFICIENT OF THERMAL SENSITIVITYF
TEMPERATURE RANGE -100 to +250 oF
ENVIRONMENTAL SEAL EPOXY
SUPPLY CURRENT / VOLTAGE RANGE [3] 2 to 20 / +18 to +30 mA /VDC
OUTPUT IMPEDANCE 100 OHMS
MATERIAL STAINLESS STEEL
WEIGHT 32 GRAMS
配件
Supplied Accessories: (2) model 6204 mounting studst) model 6210 impact cap
Recommended Accessories: model 4110C current source power unit
Compatible Cables: 6010A, 6011A
订货型号
1050V1 IEPE型自动放大器
1050V2 IEPE型自动放大器
1050V3 IEPE型自动放大器
1050V4 IEPE型自动放大器
1050V5 IEPE型自动放大器
1050V6 IEPE型自动放大器
1050C 高温型力传感器
