材料防火性能的检测室各国政府都要求强制执行的。目前世界上有建筑防火的标准体系分三大类：欧洲体系，美洲体系和澳洲体系。 SGS能为您的产品提供世界上大多数国家的防火测试，为您的产品在打入当地市场的过程中节省时间和费用 防火测试项目： 防火评级，可燃性，难燃性，不燃性，燃烧释放热量，着火性，氧指数，毒性指数，产烟量，燃烧滴落物，烟密度... 测试标准有： EN欧标建材防火测试 Fire classification of construction products and building elements. Classification using test data from reaction to fire NF P法标建材防火测试 Fire safety-building-Interior fitting materials-classification according to their reaction to fire GB 8624 建材防火等级 Classification for burning behavior of building materials and products BS 476 英标建材防火测试 Fire tests on building materials and structures. DIN 4102 德标建材防火测试 Reaction to fire tests - Ignitability of building products subjected to direct impingement of flame ASTM E 84 建材表面燃烧 Standard Test Method for Surface Burning Characteristics of Building Materials GB/T 2408 塑料燃烧性能 Plastics-Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source IS火焰蔓延 Reaction to fire tests —Spread of flame —Part 2: Lateral spread on building andtransport products in vertical configuration NFPA 259 建材潜热测试 Standard Test Method for Potential Heat of Building Materials ISO 9705 全尺寸房间火试验 Fire testing – full Scale Room test for surface produts ASTM E162 火焰蔓延 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source NES 711 燃烧烟指数 Determination of the smoke index of the products of combustion from small specimens of materials AS/NZS 3837 燃烧热值和产烟测试 Method of test for heat and smoke release rates for materials and products using an oxygen consumption calorimeter AS/NZS 1530 澳标建材防火要求 Methods for fire tests on building materials components and structures IS燃烧烟密度 Plastics- Smoke generation Part 2: Determination of optical density by a single-chamber test ASTM D3675 泡沫材料表面燃烧 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source ASTM E 648 铺地材料－辐射热源法 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source IS热释放速率 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) ASTM E136 不燃性测定 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
