模块

The Agilent E1326B autoranging 5.5-Digit Multimeter is a B-size, 2-slot, register-based VXI module. It is identical in electrical design to the E1411B, differing0nly in size. The E1326B can be used in the E1302A or the EA/B mainframes. Using the Internal Installation Kit (Er Option 009 when ordering the EA/B, the E1326B can be mounted internally in the EA/B mainframes (saving two module slots). This instrument is especially well suited for data acquisition and computer-aided test applications.

This module can be used as an integrating A/D to make 5.5-digit, low-noise measurements, or switch to the sampling A/D to make 14-bit readings at rates up to 13 kHz. When combined with any Agilent VXI relay or FET multiplexer, you can create a multichannel scanning multimeter. By sending just0ne SCPI command to the EA/B mainframe built-in command module or the E1306A command module, you can program the multimeter and the channels of your multiplexers at0ne time. The E1326B provides flexible triggering with built-in timer pacer.

Product functions for the E1326B include DCV, ACV Offset-compensated Ohm, Thermocouples, Thermistors, and RTDs.

Refer to the Related Links Section below for instrument driver availability and downloading instructions, as well as for recent product s, if applicable.

See the Agilent Website /find/inst_drivers for driver availability and downloading.

/find/inst_drivers