6SL3100-1DE22-0AA1
SINAMICS 控制电源模块 输入：600V DC /380-480V 三相交流 50/60Hz 输出:24..28.V DC +/-2%，20A
Control Supply Module in booksize format
The Control Supply Module in booksize format provides a 24 V to 28.8 V DC power supply that can be set using an integrated poteniomenter via the line or DC link. The Control Supply Module can either be operated individually or in a parallel connection with a maximum of 10 devices. A DIP switch on the top of the module is used to change over in the de-energized state (details of connection for parallel operation are given in the manual for booksize modules).
Using the Control Supply Module, it is possible for example to make specific emergency retraction movements in the event of a power failure, provided that the DC link voltage is available.
设计
Control Supply Modules feature the following connections and interfaces as standard:
1 line connection
2 DC link connections via integrated DC link busbars
2 electronics power supply connections via integrated 24 V DC bars
1 connection for the electronics power supply for Control Units, Terminal Modules, Sensor Modules, etc., via the 24 V terminal adapter provided in the scope of supply (max. cross-section 6 mm2, max. fuse protection 20 A)
1 integrated potentiometer for setting the output voltage
1 digital output to signal the error-free state
1 DIP switch to change over between single and parallel mode
2 PE (protective earth) connections
The status of the Control Supply Modules is indicated via two multi‑color LEDs.
