造雪机二次使用应注意哪些事项？
What should be paid attention to when the snowmaker is used again
1、造雪机的喷嘴清理
1. Nozzle cleaning of snowmaker
喷嘴大致分为核子器喷嘴和一般的喷嘴两种。
The nozzle can be roughly divided into two types: nuclear nozzle and general nozzle.
1.其外围就是核子器喷嘴
1. Its periphery is the nuclear nozzle
2.其它的就是就是普通喷嘴
2. The others are ordinary nozzles
核子器喷嘴：查看密封圈是否完好，查看核子嘴气孔是否被堵塞，螺旋槽是否有脏东西，是否有水渍。
Nuclear nozzle: check whether the sealing ring is in good condition, check whether the air hole of nuclear nozzle is blocked, whether the spiral groove is dirty, and whether there is water stain.
一般喷嘴：密封圈检测，螺旋槽的清理。清理时需要将每排分开清理，不能混在一起清理。
General nozzle: seal ring detection, spiral groove cleaning. During cleaning, each row shall be cleaned separately and shall not be mixed together.
2、滤网清理：检测看是否有堵死的地方，是否有破损。
2. Cleaning of filter screen: check whether there are blocked places and whether there are damages.
3、配电柜检测：查看接线柱是否有松动，定期查看接线柱，配电柜各项的功能检测。
3. Detection of distribution cabinet: check whether the terminal is loose, and regularly check the function detection of the terminal and distribution cabinet.
4、机头旋转部分：大轴承加注机油，保养润滑，弯头旋转部分滴注机油，润滑。
4. Rotating part of the machine head: oil shall be added to the large bearing for maintenance and lubrication, and oil shall be added to the rotating part of the elbow for lubrication.
5、通水检测：检查各部分水路连接是否有松动部分，密封圈是否存在破损，各部分是否漏水，检查并排除。
5. Water test: check whether there is any loose part in the water connection of each part, whether the sealing ring is damaged, and whether each part is leaking, and check and eliminate.
