澳洲应急灯具 AS新版本研读 & VEET & HEER新资讯分享 & 智能灯具附件标准研读
随着当今国际贸易形势的不断变化，澳洲市场已经在出口贸易方面占据了非常重要的 地位。应急灯具一直以来都是澳洲的热门产品，应急灯特定标准AS2293.3的2018新 版本已于近期
发布，为帮助企业及时了解新的标准变化以便对产品做出改进，我们 特地举办本次澳洲专项研讨会。同时会上将会分享澳洲能效VEET/IPART的新资讯， 并对智能开关插座的澳洲标准
深入解读，帮助客户做到早理解、早准备、早执行，及 时优化产品设计，成功抢占市场的制高点。
未来绝对是爆棚
updated from ASto AS/NZS
Changes in this edition of the Standard include the following:
(a) Introduction of requirements for alternative light sources (i.e. LED) and allowance for
the use of emerging battery technologies.
(b) Inclusion of New Zealand requirements (for publication as AS/NZS Standard).
(c) Updated references to new pictogram standards.
(d) Added definition and requirements for dual function exit signs.
(e) Replacement of AS 3137 with AS/NZS
Some details:
1. Dual function exit signs shall firstly comply with all the requirements of the subsequent clauses 3.3 and 3.4 of this Standard in order to
then be classified as an emergency luminaire.。
2. All emergency luminaires and exit signs shall comply with AS/NZSunless otherwise varied in this Standard.
3. Specific requirements relating to Clauses F6 and F8 of the New Zealand Building Code have been added where it is necessary to alter
clauses of this Standard to comply with New Zealand requirements.
4. Additional requirements of marking：
a) Where combined or sustained emergency luminaires are used, the location of the emergency light source shall be clearly marked,
together with any information necessary to ensure correct light source replacement.
b) Designed mounting positions and orientation (related to luminaire position/ safety IP rating, etc.). This information shall be marked
on the luminaire to enable identification of the classification for each mounting position.
c) For LED exit signs the body shall also be marked with the Projected Light Source Life.
5. Add new clause for particular requirements for centrally supplied emergency luminaires and exit signs。
6. New test requirement:
a) Glare limitations：
In order to restrict disability glare at higher angles, limitations are applied to the luminous intensity of the luminaire based on the mounting
height range in accordance with Table C1.
b) Colour temperature and colour rendering index：
The colour temperature shall fall with the range from 2500 K to 7000 K.
The minimum value of the colour rendering index Ra of the light source utilized in any emergency luminaire shall be greater than 40.
c) LED:
measure LED Ts temperature and operating current at 40℃.
d) PROJECTION OF LIGHT SOURCE LIFE (LSL) IN LED EXIT SIGNS:
LM-80 test report for LED should be provided and LM-80 data for the LED being assessed,based on IES TM-21,calculate the life of LED exit signs.
Changes between ASwith ASas below :
和之间的区别
1.Introduction of requirements for alternative light source(i.e.LED) and allowance for the use of emerging battery technologies.( It need LM80
test report for LED light source)
1。引入了替代光源（i.e.LED）的要求，以及对使用新兴电池技术的补贴。（它需要LM80的LED光源测试报告）
2.Include of New Zealand requirements(for publication as AS/NZS Standard)
2。包括新西兰的要求（作为as/nzs标准的出版物）
3.Updated references to new pictogram standards
3.更新的对新的象形图标准的引用
4.Added definition and requirements for dual function exit signs.
4. 增加了双功能出口标志的定义和要求。
5.Replacement of AS3137 with AS/NZS
5. AS3137替换为as/nzs
立讯检测 (股票代码做中国专业的照明检测实验室
据了解，立迅检测今年在照明领域也有不少计划，除了加强研究照明领域各个国家的标准，提升对照明
客户的上门技术服务，还有加强完成旗下各项目任务，打造南方立讯检测技术为核心的技术+业务团队。
而为了做好检测服务，立讯检测分别专门建立了安规实验室，电磁兼容实验室，光性能实验室，可靠性
测试等涉及到照明领域的，只要提供各国家标准认证要求的安全，电磁兼容，性能能效，可靠性测试等
，包括的认证领域范围有：
灯具欧洲认证（CE/GS/TUV/CE-NB）、
灯具澳洲认证（SAA/Australia EMC/LCP/VEET/IPART）、
灯具北美认证（UL/ETL/CSA/FCC/IC）、
灯具南美认证 (巴西inmetro认证)、
灯具中东认证（沙特/伊拉克/科威特/阿尔及利亚清关认证）、
灯具非洲认证（尼日利亚/坦桑尼亚/乌干达/肯尼亚/南非等）、
灯具能效测试（Erp/Lihgting Fact/DLC/DOE/能源之星等..)、
灯具零部件认证（Ballast/LED、Driver/Lampholder/Dimmer）、
化学测试（ROHS/REACH/WEEE/ASTM/加州65等）。
深圳市立讯产品技术服务有限公司 联系人：彭生
