IEC/EN 测试项目
IEC 62133-1:2017
|
测试项目 |
电芯 数量 |
电池 数量 |
|
Continuous low-rate charging (cells) 持续低倍率充电 |
5 |
—— |
|
Vibration 振动 |
5 |
5 |
|
Case stress at high ambient temperature (batteries) 高温应力 |
—— |
3 |
|
Temperature cycling 温度循环 |
5 |
5 |
|
Incorrect installation (cells) 错误安装 |
5 sets of 4 |
—— |
|
External short circuit 外部短路 |
5 per temperature |
5 per temperature |
|
Free fall 跌落 |
3 |
3 |
|
Mechanical shock (crash hazard) 机械冲击(碰撞风险) |
5 |
5 |
|
Thermal abuse (cells) 热冲击 |
5 |
—— |
|
Crushing of cells 挤压 |
5(10 for prismatic) |
—— |
|
Low pressure (cells) 低气压 |
3 |
—— |
|
Overcharge 过充 |
5 |
5 |
|
Forced discharge (cells) 强制放电 |
5 |
—— |
IEC 62133-2:2017
|
测试项目 |
电芯 |
电池 |
|
数量 |
数量 |
|
|
Continuous charging at constant voltage (cells) 恒压充电 |
5 |
—— |
|
Case stress at high ambient temperature (battery) 高温应力 |
—— |
3 |
|
External short-circuit (cell) 外部短路 |
5 per temperature |
—— |
|
External short-circuit (battery)外部短路 |
—— |
5 |
|
Free fall 跌落 |
3 |
3 |
|
Thermal abuse (cells) 热冲击 |
5 per temperature |
—— |
|
Crush (cells) 挤压 |
5 per temperature |
—— |
|
Over-charging of battery 过充 |
—— |
5 |
|
Forced discharge (cells) 强制放电 |
5 |
—— |
|
Mechanical tests (batteries)机械测试 |
—— |
|
|
Vibration 振动 |
3 |
|
|
Mechanical shock 机械冲击 |
3 |
|
|
Design evaluation – Forced internal short-circuit (cells) 强制内部短路 |
5 per temperature |
—— |
|
Measurement of the internal AC resistance for coin cells 测量电池内阻 |
3 |
—— |
