隔离墩模具设计的结构要合理，这样的话在工作的时候不易发生破裂，我们的材料
也选择优质的，如果选择便宜的塑料模具，那么会影响模具在实际工作中的效用，
尤其是模具会经过热处理的过程，如果无法承受淬火，那么模具可能出现变形的问
题，我们的模具的精度越来越标准，同时使用时间也在不断增加，整体的发展是平
衡而稳定的，成为市场不可阻挡的力量。
长时间使用隔离墩模具后必须磨刃口，而且刃口面要进行退磁,否则易发生堵料。更
换规则。隔离墩模具在使用过程中出现损坏一般都用同样规格的零件进行更换。检
查各部位的配件关系及有无损坏。隔离墩模具保养时要对损坏的部分进行修复,还要
检查气动顶料有无漏气现象。更换弹簧。隔离墩模具弹簧最易损坏，通常会出现断
裂和变形现象。我们需要进行更换，而且在更换过程中，一定要注意弹簧的规格和
型号,只有在三项都相同的情况下才可以更换。
The structure of the mold design of the isolation pier should be
reasonable. In this way, it is not easy to crack during work, and our
materials also choose high-quality ones. If we choose cheap plastic
molds, it will affect the utility of the mold in actual work, especially
the mold will go through the process of heat treatment. If we can't bear
quenching, the mold may be deformed, The accuracy of our molds is
becoming more and more standard, and the service time is also increasing.
The overall development is balanced and stable, and has become an
irresistible force in the market.
After using the isolation pier mold for
a long time, the cutting edge must be ground, and the cutting edge
surface must be demagnetized, otherwise it is easy to block material.
Replace the rule. If the isolation pier die is damaged during use, it is
generally replaced with parts of the same specification. Check the
accessory relationship of each part and whether it is damaged. During the
maintenance of isolation pier mould, the damaged part shall be repaired,
and the pneumatic jacking material shall be checked for air leakage.
Replace the spring. The mold spring of isolation pier is the most
vulnerable to damage, which usually has fracture and deformation. We need
to replace it, and during the replacement process, we must pay attention
to the specification and model of the spring. It can be replaced only
when the three items are the same.
