水泥防撞护栏墙钢模具的规格一般都是1米或是2米的，尺寸规格比较大，必须选用钢模具生产，钢模具使用马 路的两旁，有标志性的位置，这种水泥防撞墙模板在使用过的过程中，不容易搬运，同时因为自重也不回丢失，每年防撞墙的需求量比较小，都是选用钢模具生产。
水泥防撞护栏墙模具的保护措施是非常重要的，因为这是一种钢模具，钢模具是一种金属材质的模具，所以在使用的时候是非常容易生锈的，我们在使用的时候一定要注意保护，首先这种水泥防撞墙钢模板在使用完之后，一定要先进行清洗，否则会影响下一次的使用，清洗完毕之后，模板上有很多的水分，我们不能放置在阳光之下，因为钢模板是不能放到阳光下直射的，所以我们在进行干燥的时候，是需要我们用布来擦干的，这样可以快速的让水泥防撞墙模板进行干燥，不会生锈。
The specification of steel mold for cement anti-collision barrier wall is generally 1m or 2m, and the size specification is relatively large. Steel mold must be used for production. The steel mold is used on both sides of the road and has a symbolic position. This kind of cement anti-collision wall template is not easy to handle in the process of use. At the same time, because its self weight is not lost, the annual demand for anti-collision wall is relatively small, They are all made of steel molds.
The protection measures for the cement anti-collision barrier wall mold are very important, because it is a steel mold, which is a metal mold, so it is very easy to rust when in use. We must pay attention to protection when in use. First, the cement anti-collision wall steel mold must be cleaned after use, Otherwise, it will affect the next use. After cleaning, there is a lot of water on the formwork, so we can't place it in the sun, because the steel formwork can't be put in direct sunlight, so we need to wipe it with cloth when we dry it, so that the cement anti-collision wall formwork can be dried quickly without rusting.
