KUNLUN SMART 昆仑智能 专业 /专注 专心
KL-160 150-180+
全伺服定位一拖一平面口罩机>>> 片/分钟
产品特点>
1、机器运行速度高，性能稳定
2、采用超声波焊接技术，成品美观、卫生、环保
3、整个生产线从入料、鼻线插入、封边、裁切成品均为自动化作业，高效，省人工
4、全伺服控制系统自动涨力调节纠偏机构操作简单(成人儿童)一健切换色标定位
5、机架结构采用铝合金制作，关键部位采用不锈钢，整线具有不生锈、耐用、易清洁、美观等特点
6、电脑PLC编程控制，伺服驱动，自动化程度高。稳定性高、故障率低、噪音少
设备组成》
触摸屏5套 伺服电机15套 控制器15套 自动涨力调节 纠偏机构3套
产品参数>
整机尺寸 4200(L)X600(W)X2000(H)mm
整机重量 1100KG
口罩尺寸 规格14.5x9cm-17.5x9.5cm(成人/儿童)一键切换
适用压缩气体 0.6-0.7MPa
耗气量 10L/min
电压 220V/50/60Hz
功率 15KW
整线效率 150-180+pcs/min
生产环境要求 温度10-35湿度35-65%HR.无粉尘(洁净度不低于10万级)
超声波 20KHZ2Kw*2个间发波15KHZ26KW*1个长发波AC220V
焊接强度 鼻线长度不小于8cm，口景带与口置体连接处断裂强度不小于1ON
上料料盘 可以适应3盘或4盘直径650mm的布卷料 成形切片机构 操作面板 自动涨力调节纠偏机构 PLC控制器
英文简介
KUNLUN SMART Kunlun Intelligent Professional/Focussion
KL-160 150-180+
Full Servo Positioning One Drag One Flat Mask Machine >>> Piece/minute
Product Features>
1. The machine has high running speed and stable performance.
2. Adopt ultrasonic welding technology, and the finished product is beautiful, hygienic and environmentally friendly.
3. The whole production line is automated from feeding, nose thread insertion, edge sealing and cutting finished products, which is efficient and labor-saving.
4. The automatic force increase adjustment and correction mechanism of the full servo control system is simple to operate (adults and children) and switch the color standard positioning.
5. The rack structure is made of aluminum alloy, and the key parts are made of stainless steel. The whole line is rust-free, durable, easy to clean and beautiful.
6. Computer PLC programming control, servo driver, high degree of automation. High stability, low failure rate and low noise
Composition of equipment
5 sets of touch screens, 15 sets of servo motors, 15 sets of controllers, automatic force increase adjustment, 3 sets of deviation correction mechanism
Product parameters>
Whole Machine Dimension 4200(L)X600(W)X2000(H)mm
Whole unit weight 1100KG
Mask size Specification 14.5x9cm-17.5x9.5cm (adult/children) one-click switch
Suitable for compressed gases 0.6-0.7MPa
Air consumption 10L/min
Voltage 220V/50/60Hz
Power 15KW
Whole line efficiency 150-180+pcs/min
The production environment requires temperature 10-35 humidity 35-65% HR. Dust-free (cleanliness not less than 100,000)
Ultrasonic 20KHZ2Kw*2 intermittent waves 15KHZ26KW*1 long-current AC220V
Welding strength The length of the nose line shall not be less than 8cm, and the fracture strength at the connection between the mouthband and the mouth is not less than 1ON.
Feeding plate can adapt to 3 or 4 plates of cloth coil with a diameter of 650mm, forming slicing mechanism, operation panel, automatic force increase adjustment and deviation correction mechanism, PLC controller
