机械性能:
1-1.适用规格 Scope |
本规格书适用于没有键面的轻触开关. |
This specification applies to TACT switches which have no keytop. |
1-2.标准状态Standard atmospheric conditions |
除另有规定外,测量应在以下状态下进行: |
Unless otherwise specified ,the standard range of atmospheric conditions for making |
measurements and test is as following limits: |
温 度 Ambient temperature :5℃ to 35℃ |
相对湿度 Relative humidity : 25% to 85% |
气 压 Air pressure :86kpa to 106kpa |
如果对在上述所提到的条件中所做的实测值有疑问的话,应使用以下条件进行测量: |
If doubt arises on the decision based on the measured values under the above-mentioned |
conditions,the following conditions shall be employed: |
温 度 Ambient temperature : 20±2℃ |
相对湿度 Relative humidity : 60% to 70% |
气 压 Air pressure :86kpa to 106kpa |
1-3.使用温度范围 |
Operating temperature range :-30℃ to+80℃ |
1-4.保存温度范围 |
Storage temperature range : -40℃ to+85℃ |
2.构造Construction |
2-1.尺寸 Dimensions |
见所附成品图 Refer to attached drawing |
3.额定值 Rating |
3-1.额定电压 |
Rated voltage:DC 12V |
3-2.额定电流 (阻抗负载) |
Maximum operating current (resistive load) 50mA |