您的位置:志趣 » 供应信息 » 化工 » 胶粘剂

PE plastic glue

  • 发布时间:2023-12-21 08:56:25,加入时间:2013年05月21日(距今4399天)
  • 地址:中国»广东»东莞:大岭山颜屋工业区
  • 公司:东莞市景舜复合材料有限公司, 用户等级:普通会员 已认证
  • 联系:张成龙,手机:18046988502 电话:0769-85650766 QQ:2868738358

 

Product Brief

巨箭PE塑料胶水专用接着剂系采用特殊树脂的单组份胶粘剂。无刺激性气味,无毒性,可室温施工。用于粘接PE与PE、PE与ABS、PE与PVC、金属以及与ABS、GP、AS等硬胶相粘或互粘,粘结后可在常温下自然固化,定位时间较快,固化后的胶粘剂,完全不发白、不溶不熔,防水、防蚀、防锈性能好。

One-component adhesive giant arrow special adhesive system with special resin. No irritating smell, non-toxic, room temperature construction. Used for bonding PE and PE, PE and ABS, PE and PVC, ABS, GP, metal and AS hard plastic sticking or adhesive, bonding can be naturally curing at room temperature, the positioning time is quick, the cured adhesive, not pale, insoluble and infusible, waterproof, anti-corrosion, anti-rust good performance.

操作说明

Operating instructions

第一步:表面处理,应先除去材质表面上的油污或灰尘。

The first step: surface treatment, should first remove material on the surface of the oil or dirt.

第二步:施胶,施胶应厚薄均匀、到位,不留粘结盲点。必要时双面涂胶。

The second step: sizing, sizing should be uniform thickness, in place, leaving no bond blind spot. When necessary, double-sided adhesive.

第三步:施胶后应晾置5~8分钟(待手触胶体不拉丝为宜),再贴合,加压使两面紧密贴合!

The third step: after sizing should be airing 5 ~ 8 minutes (to be touching the colloid not drawing as appropriate), and joint, pressure so that the two sides closely!

第四步:贴合当即就有一定的强度,约2小时表干,24小时之后测强度!

The fourth step: Joint immediately have a certain strength, about 2 hours to dry, 24 hours after the best strength!

包装方式

Manner of packing

90ML/支,1KG/桶,3KG/桶,15KG/桶

90ML/, 1KG/ bucket, 3KG/ bucket, 15KG/ bucket

储存与保质

Storage and shelf life

存放于阴凉干燥处!远离火源,勿让孩童触及!

Stored in a cool and dry place! Away from the fire source, do not let the children touch!

常温下保质期为12个月。

Room temperature for a period of 12 months.

 

联系我时请说明来自志趣网,谢谢!

免责申明:志趣网所展示的信息由用户自行提供,其真实性、合法性、准确性由信息发布人负责。使用本网站的所有用户须接受并遵守法律法规。志趣网不提供任何保证,并不承担任何法律责任。 志趣网建议您交易小心谨慎。