Load the PV1-F cable, PV1-F cable core number 一、应用范围 One, the scope of application 广泛应用于室内外太阳能装置设备电气安装用线。 Widely used in indoor and outdoor solar equipment, electrical installation line. 特性：低烟无卤、优良的耐寒、耐紫外线、耐臭氧和耐气候性。阻燃、耐切痕、耐穿透。 Characteristic: low smoke halogen-free, excellent cold resistance, UV resistance, ozone resistance and weather resistance. Flame retardant, cut resistant, resistant to penetration. 线缆保护级别Ⅱ级。 Cable protection level ii. 环境温度：-40℃～+90℃；导体温度：120℃（允许5s内短路温度200℃）； Environment temperature: -40 ℃ ~ +90 ℃; maximum conductor temperature: 120 ℃ (allows the 5S internal short-circuit temperature 200 ℃); 额定电压：AC0.6/1kV DC1.8kV Rated voltage: AC0.6/1kV DC1.8kV 设计寿命：25年 The design service life: 25 years 结构 Structure 导体：IEC60228 5类绞合镀锡铜线 2.5、4、 6、1016mm2 PV1-F Conductor: IEC60228 5 stranded tinned copper wire of 2.5, 4, 6, 1016mm2 PV1-F 18、16、14、12、10、8、6、4、2mm2 PV wire 18, 16, 14, 12, 10, 8, 6, 4, 2mm2 PV wire 绝缘：交联低烟无卤阻燃聚烯烃双层绝缘 厚度﹥0.5mm，并符合客户给定的限值。 Insulation: cross-linking low smoke zero halogen flame retardant polyolefin insulation thickness more than 0.5mm, and in accordance with customer given limit value. 护套：交联低烟无卤阻燃聚烯烃 厚度﹥0.5mm Sheath: cross-linking low smoke zero halogen flame retardant polyolefin thickness over 0.5mm 采用150℃无卤阻燃光伏电缆辐照绝缘料（因为温度为120℃，必须高于它），是以无卤无毒改性聚烯烃树脂为主要原料，加入无卤无毒阻燃剂、热稳定剂、消烟剂、防霉剂等助剂，不含卤素（欧洲特别强调）、重金属、磷元素。且符合ROHS，浸水后绝缘电阻变化小。 By 150 ℃ halogen-free flame retardant photovoltaic cable insulation material (irradiation because the maximum temperature of 120 ℃, must be higher than it is in), halogen-free nontoxic modified polyolefin resin as the main raw material, adding halogen free flame retardant, non-toxic heat stabilizer, anti smoke agent, preservatives and other additives, does not contain halogen (Europe especially), heavy metals, phosphorus. And in accordance with ROHS, soaking insulation resistance of small changes. 一、电线电缆产品制造的工艺特性： Process characteristics, wire and cable products manufacturing: 　　1．大长度连续叠加组合生产方式 1 the continuous length of combination mode of production 　　大长度连续叠加组合生产方式，对电线电缆生产的影响是全局性和控制性的，这涉及和影响到： The continuous length of combination mode of production, effects on the production of wire and cable is global and control, which relates to and affects: 　　（1）生产工艺流程和设备布置 (1) the process and equipment layout of production 　　生产车间的各种设备必须按产品要求的工艺流程合理排放，使各阶段的半成品，顺次流转。设备配置要考虑生产效率不同而进行生产能力的平衡，有的设备可能必须配置两台或多台，才能使生产线的生产能力得以平衡。从而设备的合理选配组合和生产场地的布置，必须根据产品和生产量来平衡综合考虑。 Production workshop of equipment must be according to the requirement of products and reasonable process emissions, the half finished product of each stage, orderly transfer. Device configuration should consider different production efficiency and production capacity balance, some devices may be configured to two or more, to make the production capacity of production line balance. Thus the reasonable selection of equipment combination and production site layout, must balance considering according to products and production capacity.