铝塑板回收设备/铝塑分离机
Aluminum-plastic panel recycling equipment/ aluminum-plastic separator
铝塑板回收（铝塑板分离、铝塑管分离）：此工艺主要用于各种聚乙铝塑板、聚氯铝塑板、铝塑管、铝塑瓶盖料、汽车装饰物的回收，而且还可用于各种电线、电缆等各种铜塑制品分离回收。通过抓钩车将大的物料直接送入大型破机，再经过二级破碎和三级磨粉分解，经过振动筛把分解后的成品物料通过六辊电选机一次性分选，分离为塑料和金属。该工艺成本低、效率高、回收率可达99.8%左右。该工艺为物理干法分离，无需加热、焚烧、水和化工原料，无任何环境污染。该生产工艺我公司有四项专利，专利号：.5、.4、.x、.9和.7。
Aluminum-plastic plate recycling (separation of aluminum-plastic plate, aluminum-plastic pipe ) : Not only is the technology used for various polyethylene aluminum-plastic plate ,poly chlorine aluminum-plastic plate,aluminum-plastic pipe,aluminum-plastic bottle cap,automobile decorations,but it is used for cooper-plastic materials such as various of wires and cables and so on . The materials is sent to the large crusher directly by hook machine,then pass though secondary crushing,tertiary grinding powder decomposition and vibrating screen.The material decomposed are separated into plastic and metal in one time by the six -roller electric separator.It is a technology with low cost and high efficiency and recovery rate can reach 99.8%. It adopts physical method ,namely ,dry method separation ,which doesn’t involve the heating, fire,water and other chemical raw materials,therefore no pollution will be produced. Our company has four patents in the process, patent number: .5, .4, and .7 x.
生产线特点：
Production line features:
对整张铝塑板或其他板材宽度在180cm以下厚度14mm以下的物料，以及直径在180cm以下的各类团状物均可直接破碎分离。
The machine can separate directly for the following materials :for the whole piece of aluminum-plastic sheet, width is less than 180 cm,thickness is less than 14 mm, for the various of lumps ,diameter less is than180 cm.
全生产线为机械自动化操作，生产只需1-2人操作，降低了人力资源的消耗。
All production lines are mechanical automation operation, only need to 1-2 people, reducing the consumption of human resources.
生产线中有多个料仓，若某部分有故障，则不影响其他部分生产运行。
There are many feeding bins in the production line, if one part of them breakdown, it does not affect other parts run normally.
该生产线应用面广，对金属与非金属导电性不同的复合物在一定粒度条件下，经调换设备内筛网和调整各部位均能分选。
This production line is used widely for different conductivity compounds of metal and nonmetal, they are all separated with exchanging screen meshes and adjusting all parts of equipment.
生产线安装方便，有多种组装方法，可适应不同的场地。
Production line installation is convenient with a variety of assembly method, can adapt to different venues.
铝塑板回收设备/铝塑分离机/铝塑管回收设备
