含硼聚乙烯
含硼聚乙烯板的主要优点：防中子辐射或是防核辐射，能够有效的防止核辐射给家庭及社会造成的危害、防辐射、在隔离辐射的同时具有聚乙烯板的的各种优点。 宁津县鸿宝化工有限公司研制成功含硼聚乙烯板材，具有防中子辐射、防核辐射等高性能产品，并获得国家专利，研究表明含硼防辐射聚乙烯板能够有效的防止核辐射及中子辐射给个人及社会造成的危害，并具有以下特点： A、极高的耐磨性：由于其独特的分子结构，耐磨性高于一般的金属塑料产品，是碳钢的6.6倍，不锈钢的5.5倍，黄铜的27.3倍，尼龙的6倍，聚四氟的5倍。 B、不粘性：表面张力大磨擦系数小，无极性，所以与常见物质不亲和，因此不易粘连结垢。 C、磨擦系数小：由于其内含蜡状物质，自润滑性很好，流阻小，节省能源。 D、极好的耐化学腐蚀性：可耐除浓硫酸、浓硝酸等强氧化剂以外的几乎所有的酸、碱、盐介质。 E、耐冲击性好：即使在低温下，受到强烈的断裂。 F、电绝缘性：具有良好的电绝缘性，绝缘电阻极高。 G、其它性能：韧性好，抗疲劳，无渗出物，使用温度-70℃至90℃ 我们将以最真挚的态度为您服务。
包装： 纸箱/托盘
型号： HB-P96 规格： 2000*6000*（20-80）mm 商标： 鸿宝 材质： 聚乙烯 颜色： 白色 形态： 塑料板 特征： 热塑性塑料 成型方法： 铸塑 型号： Hb-p96
Boron polyethylene
Boron polyethylene plate of the main advantages: prevent neutron radiation or prevent radiation, can effectively prevent the radiation of the damage to their family and society, radiation protection, at the same time in the isolation of radiation has advantages of polyethylene plate of all kinds. NingJin County hong bao chemical co., LTD. The latest successful development of boron polyethylene plate, high-performance products such as neutron radiation resistant, anti radiation, and obtain the national patent, research has shown that boron anti-radiation polyethylene plate can effectively prevent the radiation and neutron radiation the damage to individuals and the society, and has the following characteristics: A, high wear resistance, because of its unique molecular structure, wear resistance is higher than general metal plastic products, 6.6 times that of carbon steel, stainless steel of 5.5 times, 27.3 times that of brass, nylon 6 times, 5 times of ptfe. B, viscosity, surface tension of small friction coefficient, nonpolar, so no affinity with the common material, therefore not easy adhesion scaling. C, small friction coefficient, due to its containing waxy substance, good self-lubrication, small flow resistance, save energy. D, excellent chemical corrosion resistance: resistant to sulfuric acid, nitric acid and other strong oxidizer outside of almost all of the acid, alkali, salt medium. E, good resistance to impact, even at low temperatures, fracture by strong. F, electrical insulation, good electrical insulation, high insulation resistance. G, other properties: good toughness, fatigue resistance, no exudation, using temperature from 70 ℃ to 90 ℃ we will with the most sincere attitude to serve you.
Packing: packed in cartons/pallets
Model: HB - P96 specification: 2000 * 6000 * (20-80) mm trademark: hong bao material: polyethylene color: white form: plastic board features: thermoplastic plastic molding methods: cast models: HB - P96
