| Luran S 778 T is an injection molding ASA grade with enhanced toughness and heat resistance. |
| RHEOLOGICAL | ASTM Test Method | Property Value |
| Melt Volume Rate 230 °C/3.8 Kg, cm³/10min. | D-1238 | 1.1 |
| Melt Volume Rate 220 °C/10 Kg | D-1238 | 5 |
| PHYSICAL | ASTM Test Method | Property Value |
| Specific Gravity | D-792 | 1.07 |
| Mold Shrink, Linear-Flow (in/in) | D-955 | 0.0055 |
| Water absorption saturated at 23°C, % | D-570 | 1.65 |
| MECHANICAL | ASTM Test Method | Property Value |
| Rockwell Hardness, R Scale | D-785 | 110 |
| Tensile Modulus, MPa (psi) | D-638 | |
| 23°C (73°F) | 2,360 () | |
| Tensile Strength, Yield (2in/min), MPa (psi) | D-638 | |
| 23°C (73°F) | 49 (7,110) | |
| Flexural Modulus, MPa (psi) | D-790 | |
| 23°C (73°F) | 2,500 () | |
| Flexural Strength, MPa (psi) | D-790 | |
| 23°C (73°F) | 71 (10,300) |
