CLIMAX高压手动注脂枪1699
This specially designed high pressure handgun, light in weight (approximately 16 lb.), is more rugged than most conventional
types and meets the exacting demands of plug valve sealants. Because the grease gun is built for servicing plug valves, all
parts are machined with minute accuracy. The polished hardened steel piston is perfectly fitted in the high pressure cylinder to
provide absolute smoothness of operation.
The CLIMAX 1699 is self-priming and can be used in any position. Because of its hydraulic principle, this guns powerful floating
piston forces lubricants, sealants, liquids, packing ect. out of the gun regardless of viscosity.
The gun is equipped with a CLIMAX 1699 Button Head Coupler for connection to the button head sealant fitting in the shank of
the valve. This coupler has a built-in feature which locks it to the fitting when the gun is under positive pressure. The coupler
cannot be connected to or separated from the fitting with the gun under pressure. This pressure may be relieved by a turn of
the by-pass valve. The by-pass valve should not be closed to a point where it is jammed into its seat, nor should it be opened
tight against the stop. The valve should be closed firmly, but not tightly. It is not necessary to open the valve past one full turn.
Due to "built-in" safety features, the CLIMAX 1699 provides the maximum safety to both the valve and the gun itself. The
hydraulic system of the gun is equipped with a relief fitting to protect the gun from injury if the operator were to continue to
pump after the gun had been depleted of valve sealant. Also, to prevent damage to the valve and sealant gun, in the event of
sealant clogging the system or the operator pumping too fast, a CLIMAX 15,000 psi gauge is provided. This accessory
indicates the point at which sufficient sealant pressure has been developed within the valve. The gauge also indicates valve
adjustment and other services required. The CLIMAX psi gauge is the highest quality, most reliable glycerin filled
gauge available. The one piece die cast brass case and heavy duty bourdon tube and movement enable the gauge to stand
up to the shock and vibration encountered on the most demanding applications. The CLIMAX gauge also features a rubber
gauge protector. Climax offers this gun with body drilled and tapped for 1/4" NPT: including psi gauge with protector
for pumping valve stem packing - This set-up indicates direct Hydraulic pressure (1699D). In addition to the gauge an external
relief valve coupler is provided, pre-set at 7500 psi. A carrying case for the Climax Model 1699 is available. Refer to the parts
list for other available options.
CLIMAX EXCHANGE
德瑞克10"卡子
德瑞克5"卡子
德瑞克减振弹簧块
BOCK模块空调压缩机马达保护器 HGX8 BCM2000
TOMAR ELECTRONICS 火灾报警站 RMS-6T-EX-WP-LP
CONTROLLI执行器 MVB56
德瑞克减振弹簧块
GARLOCK 油封 53X8630 R2 （）
摩菲温度表A20T-OS
GARLOCK 油封 53X8630 R2 （）
泰科底座 5B 5”
泰科TYCO 安装基座517.050.603 DHM-5B
Nordstrom阀门注脂枪 400-D
DNH喇叭BK-560T
DNH 扬声器SAFE-10PT
DNH 扬声器 HS-8EEXMNT
DNH扬声器 HS-15EExmNT
Rexroth MNR:R
Sperry Marine 磁罗经表盘3
LEWIS安全带 HCB-B
FHF防爆电话
本迪克斯 干燥器XJ250
NOV安全阀
TER手柄 PF
TER辅助触点开关PRSL1003PI
DNH扬声器 BK560-CRT
KAG电机M42*20/1
SOLA 24V电源 10A SDN C
SOLA 24V电源 20A SDN C
SOLA 冗余电源 20A SDN 2.5-20 RED
SOLA 冗余电源 40A SDN 30/40RED
威创传感器 5705-BSPX1052
马丁戴克仪表油 W15-1
奥地利E+E 温湿度变送器 EE31-PFTD3025D05/BG6-T26
AUDIOMASTER对讲机 310X-MV
ROXTEC支架框 G 6X1 PRIMED
ROXTEC备件包 WEDGE KIT GALV
ROXTEC插入模块 RM40
ROXTEC插入模块 RM30
ROXTEC插入模块 RM20
WESTLOCK终端版 B-EL
ORGA 15s70400 (012960)
Billy Pugh WVO-50
CANRIG编码器 N10260
CANRIG温度传感器隔离栅 N10074
猫牌 2531
不锈钢蓄能器 Hxso.075/25
猫牌 压力表 KG/CM2
cooper震动检测器 P
三阳刹车片 DB-0430-K01A
SCHMITZ胶球 24RS15M0
