Tulsion® T-52 H  3价铬去除                           ISSHSAS-18000 高级强酸型核子级离子交换树脂 Tulsion T-52 H 是一款磺酸官能团凝胶型离子交换树脂，并且具有优秀的抗氧化性和高效的操作性能。 Tulsion T-52 H 呈湿润球状，包含核子级的磺酸官能团，且有优异的物理和化学特性。 Tulsion T-52 H 特别适用于水处理，并且适合于在广泛的PH范围和高温条件下工作。   典型特性（TYPICAL CHARACTERISTICS）： Tulsion T-52 H   型式/Type 强酸性阳离子交换树脂/Strong acid cation exchange resin 主体结构/Matrix structure 交联共聚物/Crosslinked copolymer 官能基/Functional group 核子磺酸基/Nuclear sulphonic 物理型式/Physical form 琥珀色球状/Amber colored moist beads 离子型式/Ionic form 氢/Hydrogen 粒径分布/Particle size distribution 0.3 to 1.2 均粒系数/Uniformity Coefficient 1.7 max 总交换量/Total exchange capacity 1.9 meq/ml (min) 湿度/Moisture content 48±3% 反洗调节密度/Backwash settled density 830 to 860 g/ lit 允许温度/Temperature Stability 120℃ PH范围/PH range 0 - 14 溶解性/Solubility 不溶/Insoluble in all common solvent 操作条件特性 TYPICAL OPERATING CONDITIONS：Tulsion T-52 H 操作温度/ Max Operating temperature 120℃ 树脂床高度/Resin bed depth 600 mm 流速/Maximum service flow 120 m³/hr/m³ 逆洗膨胀空间/Backwash expansion space 40 - 75% 逆洗流速/Backwash flow 9 - 20 m³/hr/m³ 再生剂/Regenerant HCl/ H2SO4 for H+型/ NaCl for Na+型 再生程度/Regenerantion level H型:30 - 60 g HCl/l,40 - 250 g/l H2SO4 Na型: 60 - 160 NaCl g/l 再生剂浓度/Regenerant concentration 3-4% HCl,1.5-5% H2S% NaCl 再生流速/Regenerant flow rate 2- 16 m³/hr/m³ 再生时间/Regenerant time 20- 60 min 冲洗流速/Rinse flow rate：慢/Slow 再生流速/At regeneration flow rate 快/Fast 工作流速 冲洗量/Rinse Volume 3- 5 m³/m³ 测试（TESTING）： Tulsion T-52 H 离子交换树脂的抽样和测试是按标准的测试程序，即ASTMD - 2187和IS - . 包装（PACKING）： Tulsion T-52 H Super Sack 1000 lit Super Sack 35 cft MS drums 180 lit. MS drums 7 cft HDPE lines Bags 25 lit. HDPE lines Bags 1 cft For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment. For further information, please contact:：