美国climax注脂枪1699
沃纳worner阻挡器DEW-H
沃纳worner阻挡器DBSEW-T2-S19
沃纳Worner阻挡器DEW-G
德国Worner阻挡器DEW-G
climax注脂枪1699
climax阀门注脂枪1699
阿密龙炮头带软管 4470美国akron阿密龙3463型电控消防水炮
美国akron阿密龙3463型消防水炮
美国akron阿密龙3446 移动式消防炮
美国阿密龙产品型号3446 移动式消防炮
akron阿密龙3367型泡沫消防炮
akron 消防水枪1616型
美国1616型阿密龙多功能水枪
美国akron1616型阿密龙多功能水枪
阿密龙多功能消防水枪1616型CLIMAX高压手动注脂枪1699
This specially designed high pressure handgun, light in weight (approximately 16 lb.), is more rugged than most conventional
types and meets the exacting demands of plug valve sealants. Because the grease gun is built for servicing plug valves, all
parts are machined with minute accuracy. The polished hardened steel piston is perfectly fitted in the high pressure cylinder to
provide absolute smoothness of operation.
The CLIMAX 1699 is self-priming and can be used in any position. Because of its hydraulic principle, this guns powerful floating
piston forces lubricants, sealants, liquids, packing ect. out of the gun regardless of viscosity.
The gun is equipped with a CLIMAX 1699 Button Head Coupler for connection to the button head sealant fitting in the shank of
the valve. This coupler has a built-in feature which locks it to the fitting when the gun is under positive pressure. The coupler
cannot be connected to or separated from the fitting with the gun under pressure. This pressure may be relieved by a turn of
the by-pass valve. The by-pass valve should not be closed to a point where it is jammed into its seat, nor should it be opened
tight against the stop. The valve should be closed firmly, but not tightly. It is not necessary to open the valve past one full turn.
Due to "built-in" safety features, the CLIMAX 1699 provides the maximum safety to both the valve and the gun itself. The
hydraulic system of the gun is equipped with a relief fitting to protect the gun from injury if the operator were to continue to
pump after the gun had been depleted of valve sealant. Also, to prevent damage to the valve and sealant gun, in the event of
sealant clogging the system or the operator pumping too fast, a CLIMAX 15,000 psi gauge is provided. This accessory
indicates the point at which sufficient sealant pressure has been developed within the valve. The gauge also indicates valve
adjustment and other services required. The CLIMAX psi gauge is the highest quality, most reliable glycerin filled
gauge available. The one piece die cast brass case and heavy duty bourdon tube and movement enable the gauge to stand
up to the shock and vibration encountered on the most demanding applications. The CLIMAX gauge also features a rubber
gauge protector. Climax offers this gun with body drilled and tapped for 1/4" NPT: including psi gauge with protector
for pumping valve stem packing - This set-up indicates direct Hydraulic pressure (1699D). In addition to the gauge an external
relief valve coupler is provided, pre-set at 7500 psi. A carrying case for the Climax Model 1699 is available. Refer to the parts
list for other available options.
CLIMAX EXCHANGE
