美国DYTRAN 3059A 加速度计 美国DYTRAN 3059A 振动传感器 3059A 工业型加速度传感器 深圳市汉斯福特科技有限公司 座机： 手机： 传真： Q Q: 公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼 灵敏度 ±100 mV/g 量程 ±50 g 重量 74 grams 冲击 3000 g 频响（±5%） 0.3 - 8000 Hz 温度 -51 – 121 ℃ 安装方式 通孔1/4-28 概述 The Dytran model 3059A is a low profile IEPE piezoelectric accelerometer featuring a thru hole 1/4-28 mount and radial 2-pin MIL-C-5015 connector. This unique configuration allows the sensor to be turned 360° prior to securing for ease of sensor installation. Available with a sensitivity of 100 mV/g, design of the model 3059A incorporates a ceramic shear sensing element packaged in a highly rugged stainless steel housing. With a low-end frequency response of 0.5 Hz and excellent low noise performance, the model 3059A is ideal for vibration monitoring of slowly rotating machinery and other equipment. Units are hermetically sealed for reliable operation in high humidity and dirty environments, and are internally case isolated to avoid EMI/ground loop interference. 特性 100 mV/g sensitivity 50g range 0.3 to 8,000 Hz frequency range (±3db) 2-pin radial connector 1/4-28 thru hole mount 73 grams Stainless steel Hermetic Case isolated Low noise JFET electronics IEPE 应用 Industrial vibration monitoring Low profile, space constrained vibration monitoring Vibration monitoring of rotating machinery General purpose vibration monitoring 参数 WEIGHT 74 GRAMS SIZE, L x W x H 1.73 x .74 x .85 IN MOUNTING PROVISION, MOUNTING BOLT THRU HOLE, CAPTIVE 1/4-28 BOLT ELECTRICAL CONNECTOR, RADIAL 2-PIN MILITARY 10SL-4P, HERMETIC MATERIAL CASE/CONNECTOR 300 SERIES SST ELEMENT STYLE CERAMIC PLANAR SHEAR PERFORMANCE SENSITIVITY, ± 5 % [1] 100 mV/G RANGE FOR ± 5 VOLTS OUT, ±50 G FREQUENCY RESPONSE, ± 3 db .3 - 8,000 Hz MOUNTED RESONANT FREQUENCY, TYP. 21 kHz EQUIV. ELECT. NOISE FLOOR, (RESOLUTION) .0006 G RMS AMPLITUDE NON-LINEARITY (ZERO BASED BEST FIT ST.LINE METHOD) 2.0 % F.S., MAX. TRANSVERSE SENSITIVITY, MAX. 5 PERCENT STRAIN SENSITIVITY .001 G's PER MICROSTRAIN @ 250/ ENVIRONMENTAL MAXIMUM VIBRATION 350 G's, RMS MAXIMUM SHOCK 3000 G's, PEAK TEMPERATURE RANGE -60 TO +250 oF ENVIRONMENTAL SEAL GLASS TO METAL/WELDED, HERMETIC ELECTRICAL COMPLIANCE (SUPPLY) VOLTAGE RANGE [2] +20 to +30 VDC EXCITATION CURRENT RANGE 2 to 20 mA OUTPUT IMPEDANCE, NOM. 200 OHMS OUTPUT BIAS VOLTAGE 11 to 13 VDC DISCHARGE TIME CONSTANT 0.5 to 1.2 SEC. OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD TOP POSITIVE GOING POWER/SIGNAL GROUND to CASE ISOLATION, MIN. 10 MEGOHMS 配件 1. Model 6184 2. Model 4110C current source power unit, model 6187 magnetic mounting base, model 6190 magnetic mounting base 3. 电缆线：6038A, 6080A, 6082A, 6406A, 6407A, 6459A 尺寸