优点:防火耐磨阻燃高强度耐高温高抗冲食品级耐辐射耐化学耐水解耐热性耐氧化耐辐射
抗蠕变耐腐蚀耐老化高透明耐热水耐蒸汽耐乙醇电绝缘性
介绍:
PSU成型:为减小注塑制品产生内应力,模具温度应控制在度。成型后可采取退火处理甘油浴退火处理,160度,1-5分钟;或采取空气浴160度,1-4小时。退火时间取决于制品的大小和壁厚。
我司还供应以下产品:
供应 PSU HiFill PSU 0147 TC-1 生产商: Techmer Engineered Solutions |
供应 PSU HiFill PSU GF10 生产商: Techmer Engineered Solutions |
供应 PSU HiFill PSU GF20 BK 生产商: Techmer Engineered Solutions |
供应 PSU HiFill PSU LE WT 生产商: Techmer Engineered Solutions |
供应 PSU HiFill PSU/ABS 1000 GF10 生产商: Techmer Engineered Solutions |
供应 PSU HiFill PSU/ABS 1000 生产商: Techmer Engineered Solutions |
供应 PSU Plaslube PSU GF20 TL5 生产商: Techmer Engineered Solutions |
供应 PSU Plaslube PSU GF30 TL15 生产商: Techmer Engineered Solutions |
供应 PSU Plaslube PSU TL20 生产商: Techmer Engineered Solutions |
供应 PSU TYNEL S170 生产商: Tyne Plastics LLC. |
eyes brimming with tears of happiness. He looked almost exactly as Harry remembered him; the pencil-shaped nose, the batlike ears, the long fingers and feet - all except the clothes, which were very different.
When Dobby had worked for the Malfoys, he had always worn the same filthy old pillowcase.
Now, however, he was wearing the strangest assortment of garments Harry had ever seen; he had done an even worse job of dressing himself than the wizards at the World Cup. He was wearing a tea cozy