Measuring Range in Steel
0.040 - 8.00 inches
1.00 - 200.0 mm
The new CHECK-LINE TI-44N Ultrasonic Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
The attractive, ergonomic housing design is extremely compact, lightweight and rugged. It fits comfortably in the palm of your hand and incorporates a back light that illuminates the LCD in poorly lit areas. This product is similar to our Check-Line Checkline TI-45N, however the probe is hard-wired to the gauge and is NOT removable as in the Check-Line TI-45N.
特性
1. Resolution of 0.001" (0.01mm) with Switch-selectable units of inches or mm
2. Extremely small & lightweight operating from a single AA battery.
3. Fixed-mounted probe is connected to gauge with one meter flexible cable (39")
4. Built-in calibration test plate on front of gauge housing
5. Quick display update with last reading retained on the display
6. Display symbols alert user to poor coupling and low battery conditions
7. NIST-Traceable Calibration Certificate & Test Report is optionally available
参数
|
Range in Steel |
0.040 - 8.000" (1.0 - 200.0 mm) |
|
Resolution |
.001" (0.01 mm) |
|
Display |
4½ - digit LCD display, 0.39" (10mm) high with push button illumination |
|
Velocity Range |
3,250 - 39,000 ft/sec |
|
Probe |
5 MHz, .39" (10 mm) diameter |
|
Cable |
39" (1m) 2-wire, long cable with fixed-mounted to gauge body |
|
Minimum Pipe Size |
1" nominal (30mm) steel pipe |
|
Temp. Limits |
Ambient: 25 to 125° F (-5 to 50° C) |
|
Calibration Plate |
0.250" (6.35mm) steel plate, built into the front of the housing |
|
Battery Type |
1x AA battery |
|
Battery Life |
200 hours |
|
Weight |
Gauge: 7 ounces (200 g) |
|
Size |
5.2" x 2.7" x 1.1" |
|
Warranty |
Gauge: 1 years |
