高光蒸气注塑控温设备/高光蒸气模温机
高光过热水模温机特点：
消除产品表面溶接线，溶接痕，波纹，银丝纹。
Remove the welding wires and traces, ruffles and silver marks on product surfaces.
彻底解决塑料产品的表面缩水现象。
Solve the surface shrinkage of plastic products completely.
提高产品表面光洁度，使表面光洁度可达到镜面。
Enhance the product surface as smooth as a mirror.
产品不需要喷漆后续加工，提高成品率20-30%。
It is unnecessary to conduct processing after spraying to products, increasing the rate of finished products by 20% to 30%.
解决加织产品甩产生的浮织现象使品质更完美。
Solve the float phenomenon of woven products, ensuring better quality.
使薄壁成型提高注塑流动性，提高产品品质和强度。
Make thin walls formed, so as to improve the fluidity in injection molding and product quality and strength.
使厚壁成型注塑周期可降低60%以上，增强塑料的流动性及填充效果。
The injection molding period for the thick wall forming may be reduced by over 60%, improving plastics’ fluidity and filling effect.
95%的热能回收。
95% of heat energy may be recovered.
100%的介质回收。
The medium may be recovered completely.
无需连接锅炉及其他外置温控辅助设备，省略复杂的锅炉设备（高压设备安全和环保的审批）和管道工程。
It is unnecessary to connect it with a boiler or other external auxiliary temperature controlling equipment, avoiding the application of complicated boiler plants (the approval of the safety and environmental protection performance of high-pressure equipment) and pipe works.
完全解决锅炉之蒸汽不可回收的能耗大问题。
Solve the great energy consumption of boilers due to steam cannot be recycled.
体积小可随时移动配合不同机台使用，180℃热水完全代替锅炉的不环保现象。
Due to its small volume, it can be moved conveniently and used with different equipment. The hot water of 180℃ can completely overcome the disadvantage of environmental pollution of boilers.
