成型特
1、无定形料，流动性中等，吸湿大,必须充分干燥,表面要求光泽的塑件须长时间预热干燥80-90度，3小时。
2、宜取高料温，高模温,但料温过高易分解(分解温度为>270度)。对精度较高的塑件,模温宜取50-60度,对高光泽.耐热塑件,模温宜取60-80度。
3、如需解决夹水纹，需提高材料的流动性，采取高料温、高模温，或者改变入水位等方法。
4、如成形耐热级或阻燃级材料，生产3-7天后模具表面会残存塑料分解物，导致模具表面发亮，需对模具及时进行清理，同时模具表面需增加排气位置。
5、强度较高，耐冲击能力强。
专业供应加纤ABS、防火ABS、抗静电ABS、抗紫外线ABS、抗冲击ABS、食品级ABS、耐热级ABS、耐候级ABS、高流动ABS、以及吹塑级ABS、挤出级ABS、透明级ABS等。
本公司长期供应塑胶原料，种类多样化，标准化，技术化，价格合理。发货准，交期准.质量有保障！本公司郑重承诺：诚信经营，质量至上，可為客户提供（物性、报价、UL报告、RoSH标准、SGS检测报告等）敬请来电咨询洽谈！详情请致电：严生（业务经理）。手机；
详细说明：Here, then, are certain Macgregors habitually using the name of Stevenson, and at last, under the influence of Methodism, adopting it entirely. Doubtless a proscribed clan could not be particular; they took a name as a man takes an umbrella against a shower; as Rob Roy took Campbell, and his son took Drummond. But this case is different; Stevenson was not taken and left — it was consistently adhered to. It does not in the least follow that all Stevensons are of the clan Alpin; but it does follow that some may be. And I cannot conceal from myself the possibility that James Stevenson in Glasgow, my first authentic ancestor, may have had a Highland alias upon his conscience and a claymore in his back parlour.
