PR 德国赛多利斯传感器 PR 德国赛多利测力传感器
PR6201 称重传感器
深圳市汉斯福特科技有限公司
座机：
手机：
传真：
Q Q:
公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2
概述
The PR 6201 range of load cells is specially designed for weighing silos, tanks and process vessels. The unique design principle, in combination with the FlexLock installation kits, makes it possible to counterbalance movements arising from mechanical or thermal expansion or contraction of the vessel or its supporting construction. A particular design characteristic is that the overall height and shape of the load cell remain unchanged, even after two decades of use. Alongside this, the unit has an especially high overload capacity of up to 200%.
称重传感器实际上是一种将质量信号转变为可测量的电信号输出的装置。用传感器应先要考虑传感器所处的实际工作环境，这点对正确选用称重传感器至关重要，它关系到传感器能否正常工作以及它的安全和使用寿命，乃至整个衡器的可靠性和安全性。在称重传感器主要技术指标的基本概念和评价方法上，新旧国标有质的差异。主要有S型、悬臂型、轮辐式、板环式、膜盒式、桥式、柱筒式等几种样式。
特性
500kg… 50t Type LA/L/D1/C3
1. Easy to install
2. Full stainless steel housing
3. Wide temperature range
4. High overload capacity
5. Resistant against vibrations
6. Hermetically sealed, IP 68 (depth of 1.5m for 10,000 hrs.), IP 69K
7. 4 to 20mA output signal as option (LA version)
8. Best overvoltage protection
9. Ex-version available (PR 6201/..E)
称重传感器实际上是一种将质量信号转变为可测量的电信号输出的装置。用传感器应先要考虑传感器所处的实际工作环境，这点对正确选用称重传感器至关重要，它关系到传感器能否正常工作以及它的安全和使用寿命，乃至整个衡器的可靠性和安全性。在称重传感器主要技术指标的基本概念和评价方法上，新旧国标有质的差异。主要有S型、悬臂型、轮辐式、板环式、膜盒式、桥式、柱筒式等几种样式。
参数
Accuracy class 0,25 0,25 0,04 0,015 % Emax
Minimum dead load lowest limit of specified measuring range Emin 0 0 0 0 % Emax
Maximum capacity highest limit of specified measuring range Emax s. table s. table s. table s. table
Minimum LC verification minimum load cell verification interval,
vmin = Emax/Y Y 5.000 14.000
interval for Emax = 1,000kg Y 4.000
for Emax = 500kg Y 2.000
Rated output relative output at nominal load Cn 16mA 1 1 1 mV/V
for Emax = 50t Cn 16mA 2 2 2 mV/V
Tolerance on rated output permissible deviation from rated output dc < 1.0 < 1.0 < 0.25 < 0.07 % Cn
Zero output signal load cell output signal under unloaded condition Smin 4mA < 2.0 < 1.0 < 1.0 % Cn
Repeatability error max. change in load cell output
for repeated loading εR < 0.02 < 0.02 < 0.01 < 0.005 % Cn
Creep, during 30 min. max. change in load cell output
under nominal load dcr < 0.05 < 0.05 < 0.03 < 0.015 % Cn
Non-Linearity max. deviation from best straight line through zero dLin < 0.25 < 0.25 < 0.03 < 0.01 % Cn
Hysteresis max. difference in load cell output dhy < 0.25 < 0.25 < 0.04 < 0.015 % Cn
