深圳市汉斯福特科技有限公司
杨工
座机：
手机：
传真：
Q Q:
公司地址：龙华新区大浪街道大浪社区伟达工业园A栋2楼
概述
Measuring Range in Steel
Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters)
Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters)
(range depends upon probe selected)
5 year warrantyThe new CHECK-LINE TI-25DL-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!
超声波测厚仪是根据超声波脉冲反射原理来进行厚度测量的，当探头发射的超声波脉冲通过被测物体到达材料分界面时，脉冲被反射回探头通过精确测量超声波在材料中传播的时间来确定被测材料的厚度。凡能使超声波以一恒定速度在其内部传播的各种材料均可采用此原理测量。
Checkline TI-25DL-MMX can be used in a Single Thickness Reading mode or in a Scan mode, where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.
TI-25DL-MMX incorporates a built-in memory for 1000 data points that can be separated into 10 separate "batches." The stored data can be downloaded to a serial printer or a personal computer. A Windows compatible data transfer program is supplied at no additional cost.
超声波测厚仪是采用 的高性能、低功耗微处理器技术，基于超声波测量原理，可以测量金属及其它多种材料的厚度，并可以对材料的声速进行测量。可以对生产设备中各种管道和压力容器进行厚度测量，监测它们在使用过程中受腐蚀后的减薄程度，也可以对各种板材和各种加工零件作精确测量。
本测厚仪采用脉冲反射超声波测量原理，适用于超声波能以一恒定速度在其内部传播,并能从其背面得到反射的各种材料厚度的测量。此仪器可对各种板材和各种加工零件作精确测量。可广泛应用于石油、化工、冶金、造船、航空、航天等各个领域。
The TI-25DL-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
参数
|
Range |
Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T probe) |
|
Resolution |
.001" (0.01 mm) |
|
Display |
4½ - Digit, 0.5" Backlit LCD |
|
Velocity Range |
0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec |
|
Probe |
5 MHz, 0.25" Diameter (6.35 mm) |
|
Probe Wearface |
PEEK (Polyethlethylketone) |
|
Cable |
4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). |
|
Temp. Limits |
Ambient: -20 to 120° F (-30 to 50° C) |
|
Serial Output |
RS-232C (8, N, 1, user-set baud rate) |
|
Battery Type |
Two AA batteries |
|
Battery Life |
200 hours |
|
Weight |
7 ounces (196 g) |
|
Size |
2.5 x 4.5 x 1.25" |
|
Accessories Included |
Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. |
|
Warranty |
Gauge: 5 Years |
