STC称重传感器
概述
The S-type load cell, as the name indicates, can be easily identified by S-shaped body. They can be loaded either in tension or compression, and used for single or multiple-cell application if the output is rationalized. STC is made of Aluminum, Alloy Steel or Stainless Steel, sealed to IP67 providing excellent protection against moisture and humidity.
特性
量程：铝结构5, 10, 20kg，合金钢kg, 250-40k lbs
双向测量（拉压）
合理化输出
NTEP Class III 5000S, lllL10000认证
选配：不锈钢
应用
电子机械转换秤
筒仓秤/料斗秤/罐体称重
吊秤
叉车秤
配料给料
通用材料试验机
张力和拉力测量
参数
NTEP/OIML accuracy class NTEP III & IIIL Non-Approved
Maximum no. of intervals (n) III 5000 single*
IIIL10000 single* 2000
Y = Emax/Vmin 10000 5000 Maximum available
Standard capacities (Emax) (Aluminum) 5, 10, 20 kg
Standard capacities (Emax) (Steel)
25, 50, 75, 100, 250, 500, 750, 1000, 1500, 2000, 2500, 5000 kg
250, 300, 500, 750, 1k, 1.5k, 2k, 2.5k, 3k, 5k, 7.5k,
10k, 15k, 20k, 40k lbs
Rated output—R.O. (Aluminum) 2.0 mV/V
Rated output—R.O. (Steel) 3.0 mV/V
Rated output tolerance 0.25 ±% of rated output
Zero balance 1 ±% of rated output
Non-linearity 0.020 0.020 (SS: 0.05) ±% of rated output
Hysteresis 0.020 0.020 (SS: 0.05) ±% of rated output
Non-repeatability 0.020 ±% of rated output
Creep error (20 minutes) 0.030 ±% of rated output
Zero return (20 minutes) 0.030 ±% of rated output
