KOPEL KP3755 TPE塑胶粒 TPE塑胶粒 韩国科隆 弹性体
耐寒TPEE材料 耐候原材料
Processing/Physical Characteristics Value Unit Test Standard
ASTM Data
Melt Flow Index 12 g/10min ASTM D 1238
Temperature 200 °C -
Load 2.16 kg -
Mold Shrinkage, MD 0.001 mm/mm ASTM D 955
Density 1180 kg/m³ ASTM D 792
Water Absorption, 24hr 0.5 % ASTM D 570
Mechanical properties Value Unit Test Standard
ASTM Data
Tensile Strength 36 MPa ASTM D 638
Flexural Modulus 172 MPa ASTM D 790
Shore D Hardness 55 - ASTM D 2240
Taber Abrasion Resistance 5 mg/1000 cycles ASTM D 1044
Izod Impact notched, 1/8 in N kJ/m ASTM D 256
Izod Impact notched, Low-Temperature N kJ/m ASTM D 256
Temperature -40 °C -
Thermal properties Value Unit Test Standard
ASTM Data
UL 94 Flame rating HB - UL 94
DTUL @ 66 psi 100 °C ASTM D 648
Melting Temperature 199 °C ASTM D 3418
Characteristics
