产品概要 高性能、重负荷的极压工业齿轮油。采用硫 磷添加剂系统，以及防锈防腐蚀剂、抗氧化剂与金属钝化剂配方而成。可广泛用于重载荷和冲击载荷工况中的各种工业齿轮的润滑。 特点 l 提高齿轮组的效率 热稳定性高的极压(EP)添加剂系统保持齿轮和轴承摩擦面的清洁干净，极大地减少摩擦面上的沉积物，确保齿轮和轴承的有效润滑。很高的氧化稳定性，使得在用油液不易稠化，从而减少能量损失。 l 延长设备使用寿命 非常有效的极压添加剂系统，能够在金属与金属的接触面上形成有效的保护膜，大大减少磨损，提高动力传递效率。良好的水分离特性和较强的防锈能力，防止金属表面出现锈蚀及腐蚀。不仅如此，添加剂系统的热稳定性非常好，进一步降低对轴承材料有腐蚀性的高温化合物的生成。有效的防腐添加剂又使金属零部件得到额外保护。 l 使用寿命长 非常有效的抗氧化剂和铜钝化剂，极大地减缓氧化过程，从而控制使用过程中粘度增大的趋势，并具有使用寿命长的特点。 Thermal stability of high extreme pressure (EP) additive system keep the gear and bearing friction surface clean clean, greatly reducing the friction on the surface of the sediments, ensure the efficient and effective lubrication of the gear and bearing.High oxidation stability, made with the oil not thickened, thus reducing the energy loss. L prolong the service life of equipment Extreme pressure additive system is very effective, can be formed on the surface of the metal to metal contact effective protective film, greatly reduce wear and improve the efficiency of power transmission.Good water separation properties and strong ability of rust, prevent the metal surface from rust and corrosion.Not only that, additive system thermal stability is very good, further reduce the high temperature of bearing material corrosive compound is generated.Effective anti-corrosion additives and metal parts get extra protection. L have long service life Very effective antioxidants and copper passivation agent, greatly reduce oxidation process, so as to control the tendency of increase with the viscosity in use process, and have the characteristics of long service life.