Advantages of ultra high molecular weight polyethylene suction box panel produced by shandong hongbao chemical industry:
(1) high hardness, good wear resistance and long service life.
(2) low friction coefficient and less wear of polyester mesh.
(3) it can significantly reduce the driving load of the network and reduce the energy consumption (less than 1/3 of the energy consumed in the network).
(4) the performance of flatness and overall rigidity is significantly higher than that of the inlaid ceramic strip.
(5) good processability, and can be used to make all kinds of holes.
(6) due to good processing, it is especially suitable for use in large paper machines with over 3150.
(7) lower cost than overall ceramic or inlaid ceramic suction box.
山东鸿宝化工生产的超高分子量聚乙烯吸水箱面板的优点：
(1) 硬度高，耐磨性好，使用寿命长。
(2) 与聚脂网磨擦系数低，对聚脂网磨损少。
(3) 能显著降低网部驱动载荷，减少能耗(降低网部能耗1/3以上。
(4) 平直度、整体刚性等性能比镶嵌陶瓷条吸水箱面板有显著提高。
(5) 加工性好，可制造各种孔型的吸水箱。
(6) 由于加工性好，特别适合用于3150以上大型纸机使用。
(7) 比整体陶瓷或镶嵌陶瓷吸水箱成本低。
详情请咨询销售人员刘女士1506 QQ：
