(1) high hardness, good wear resistance, long service life.
(2) low friction coefficient with polyester mesh, less wear on polyester mesh.
(3) it can significantly reduce the driving load of the grid part and reduce energy consumption (reduce energy consumption of the grid part by more than 1/3).
(4) the flatness, overall rigidity and other properties are significantly improved compared with the panel of ceramic strip water suction box.
(5) good processing, can produce various types of water absorption box.
(6) due to good processing, especially suitable for the use of large paper machine over 3150.
(7) lower cost than integral ceramic or inlaid ceramic suction box.
(1) 硬度高，耐磨性好，使用寿命长。
(2) 与聚脂网磨擦系数低，对聚脂网磨损少。
(3) 能显著降低网部驱动载荷，减少能耗(降低网部能耗1/3以上。
(4) 平直度、整体刚性等性能比镶嵌陶瓷条吸水箱面板有显著提高。
(5) 加工性好，可制造各种孔型的吸水箱。
(6) 由于加工性好，特别适合用于3150以上大型纸机使用。
(7) 比整体陶瓷或镶嵌陶瓷吸水箱成本低。
